Package com.digi.xbee.api.models

Class Summary

Class	Description
AccessPoint	This class represents an Access Point for the Wi-Fi protocol.
ATCommand	This class represents an AT command used to read or set different properties of the XBee device.
ATCommandResponse	This class represents the response of an AT Command sent by the connected XBee device or by a remote device after executing an AT Command.
CoAPURI	Class containing the different constants that can be used as Uniform Resource Identifier (URI) when working with CoAP transmissions.
ExplicitXBeeMessage	This class represents an Explicit XBee message containing the remote XBee device the message belongs to, the content (data) of the message, a flag indicating if the message is a broadcast message (was received or is being sent via broadcast) and all the application layer fields: source endpoint, destination endpoint, cluster ID and profile ID.
HardwareVersion	This class represents the hardware version number of an XBee device.
IPMessage	This class represents an IP message containing the IP address the message belongs to, the source and destination ports, the IP protocol, and the content (data) of the message.
RemoteATCommandOptions	This class lists all the possible options that can be set while transmitting a remote AT Command.
SMSMessage	This class represents an SMS message containing the phone number that sent the message and the content (data) of the message.
UserDataRelayMessage	This class represents a User Data Relay message containing the source interface and the content (data) of the message.
XBee16BitAddress	This class represents a 16-bit network address.
XBee64BitAddress	This class represents a 64-bit address (also known as MAC address).
XBeeIMEIAddress	This class represents an IMEI address used by cellular devices.
XBeeMessage	This class represents an XBee message containing the remote XBee device the message belongs to, the content (data) of the message and a flag indicating if the message is a broadcast message (was received or is being sent via broadcast).
XBeePacketsQueue	This class represents a queue of XBee packets used for sequential packets reading within the XBee Java API.
XBeeReceiveOptions	This class lists all the possible options that have been set while receiving an XBee packet.
XBeeTransmitOptions	This class lists all the possible options that can be set while transmitting an XBee data packet.

Enum Summary

Enum	Description
APIOutputMode	Enumerates the different API output modes.
AssociationIndicationStatus	Enumerates the different association indication status.
ATCommandStatus	Enumerates all the possible states of an AT Command after executing it.
ATStringCommands	Enumerates several AT commands used to parse AT command packets.
CellularAssociationIndicationStatus	Enumerates the different association indication status for the Cellular protocol.
DeviceCloudStatus	Enumerates the different Device Cloud statuses.
DiscoveryOptions	Enumerates the different options used in the discovery process.
FrameError	Enumerates the different frame errors.
HardwareVersionEnum	Enumerates the different hardware versions of the XBee devices.
HTTPMethodEnum	Enumerates the different HTTP method values.
IPAddressingMode	Enumerates the different IP addressing modes.
IPProtocol	Enumerates the different IP protocols.
ModemStatusEvent	Enumerates the different modem status events.
OperatingMode	Enumerates the different working modes of the XBee device.
PowerLevel	Enumerates the different power levels.
RestFulStatusEnum	Enumerates the different RestFul statuses.
SendDataRequestOptions	Enumerates the different options for the SendDataRequestPacket.
SpecialByte	Enumerates all the special bytes of the XBee protocol that must be escaped when working on API 2 mode.
SrpError	Enumerates the different errors of the SRP authentication.
SrpStep	Enumerates the available steps of the SRP authentication.
ThreadAssociationIndicationStatus	Enumerates the different association indication status for the Thread protocol.
WiFiAssociationIndicationStatus	Enumerates the different association indication status for the Wi-Fi protocol.
WiFiEncryptionType	Enumerates the different Wi-Fi encryption types.
XBeeDiscoveryStatus	Enumerates all the possible states of the discovery.
XBeeLocalInterface	Enumerates the different XBee local interfaces used in the Relay API packets.
XBeeProtocol	Enumerates the available XBee protocols.
XBeeTransmitStatus	Enumerates the different transmit status.