Release Notes PN 93000786_B
Digi Connect(R) Tank
82003718_B EOS
Firmware Version 2.0.2.48
December 18, 2015


INTRODUCTION

	
Digi Connect Tank allows you to remotely monitor the liquid level in a single tank. The Connect
Tank device operates wirelessly by running on a long-life battery and communicating through the
cellular network.


SUPPORTED PRODUCTS

	CTANK-A510	Connect Tank, Short Range Ultrasonic sensor, North America HSPA
	CTANK-A511	Connect Tank, Short Range Ultrasonic sensor, North America HSPA, with GPS
	CTANK-A520	Connect Tank, Mid Range   Ultrasonic sensor, North America HSPA
	CTANK-A521	Connect Tank, Mid Range   Ultrasonic sensor, North America HSPA, with GPS
		
	CTANK-A610	Connect Tank, Short Range Ultrasonic sensor, International HSPA
	CTANK-A611	Connect Tank, Short Range Ultrasonic sensor, International HSPA, with GPS
	CTANK-A620	Connect Tank, Mid Range   Ultrasonic sensor, International HSPA
	CTANK-A621	Connect Tank, Mid Range   Ultrasonic sensor, International HSPA, with GPS

	CTANK-A710	Connect Tank, Short Range Ultrasonic sensor, Global HSPA
	CTANK-A711	Connect Tank, Short Range Ultrasonic sensor, Global HSPA, with GPS
	CTANK-A720	Connect Tank, Mid Range   Ultrasonic sensor, Global HSPA
	CTANK-A721	Connect Tank, Mid Range   Ultrasonic sensor, Global HSPA, with GPS



Firmware Version 2.0.2.48
=========================

Release Notes - Digi Connect Tank V2 (Abrams) - Version Rev B

HIGHLIGHTED PRODUCT CHANGES
	Add support for Global HSPA Cellular Modem
	
ENHANCEMENTS
    Time server is configurable using both the cli and device cloud
    Update device cloud url to:  my.devicecloud.com
	

BUG FIXES
    [DCTV2-1160] - Fix issue where a watchdog timeout occurred during console session
    [DCTV2-1161] - Allow for a maximum of 96 readings to be stored 
    [DCTV2-1190] - Updated battery reporting


KNOWN ISSUES

	None.

DOCUMENTATION ERRATA

    None.

HISTORY
=======


Firmware Version 2.0.2.26
=========================

HIGHLIGHTED PRODUCT CHANGES

	This is the Initial release of the new Connect Tank V2	
	Local command line interface (CLI):
		* Display device status information
		* Configure cell APN and Digi Device Cloud address
		* Update the firmware
		
	Added additional ultrasonic sensor configuration via Device Cloud

ENHANCEMENTS

	Command Line Interface via USB	

BUG FIXES

	None.


KNOWN ISSUES

	None.

DOCUMENTATION ERRATA

    None.


ADDITIONAL INFORMATION

	The following features are not supported in this release:
		* SMS is not supported
		* Battery life monitoring is not supported