UD-CISC Release Notes

			      for 

		Digi User Diagnostic Package - CISC


	CISC User Diagnostic    - UD-CISC.EXE  Version 1.9.0
	Memory Map Utility      - DIGIMMAP.EXE  Version 1.5.0
	User Diagnostic Manual  - USERCISC.TXT


		Diskette P/N 40001487H (3.5") V 1.0.7
                Release Notes P/N 93000325A

			    12/15/98

	1. Enhancements

		This program now requires that the machine be at least a 
		386, that it is NOT running in virtual mode(a DOS window), 
		and that there are no memory managers present.  If any of 
		these conditions exist, one of the following three messages 
		will be displayed and the program will exit to DOS.

	- Program requires 386 or better CPU to run ... aborting to DOS O/S.
	- CPU is in Virtual Mode ... clean-boot DOS O/S to run this program.
	- Installed memory driver(s) found ... clean-boot DOS O/S.

		All references for RS-422 have been changed to EIA-422.


	2. Bug Fixes

		COM/Xi - Fixed ports 1/2/5/6 RS-485/422 bug.  Previous
			revisions would fail external port loopback tests
			with a proper loopback installed on RS-485 ports.

	3. Known Limitations

		The current release supports the following product families:
			- AccelePort Xe adapters (ISA/MC).
			- AccelePort C/X adapters (ISA/EISA/MC).
			- PC/Xe adapters.
			- PC/Xi adapters.
			- 32K MC/Xi adapters.
			- C/X adapters (ISA/EISA/MC).
			- MC/Xe adapters.
			- COM/Xi adapters.

		Refer to the user diagnostic manual (USERCISC.TXT) for 
		further information.

	4. Manual Errata

		The User Diagnostic manual is provided on the release
		disk as a file in ASCII text format.  The manual is
		called USERCISC.TXT.