Release Notes 93000421_B Digi Port Authority - Remote Version 2.00.07 for UnixWare 40002189_B.pkg Supported OS Versions: Release 7.1.0 and later Package Part Number 40002189_B 01/28/2002 1. INTRODUCTION This Digi software package includes all libraries and software required to support SNMP monitoring of the Digi International family of PortServer Devices. On the various supported UNIX's, this package requires that an X-Windows environment be installed in order to run. On all systems, this package requires that a browser be installed to display help. Please reference the following number(s) when searching the Digi International web site (www.digi.com) or ftp site (ftp.digi.com) for the latest software package: Package Distribution Part Numbers: UnixWare - 40002189 OpenServer - 40002190 HP-UX - 40002193 Linux - 40002188 Solaris - 40002191 AIX - 40002192 Microsoft Windows - 40002187 2. SUPPORTED PRODUCTS Terminal Servers: Digi One RealPort PortServer II PortServer TS 3. ENHANCEMENTS o Added device discovery using SNMP o Added device discovery using ADDP (A Digi Discovery Protocol) o Added more Options and the ability to save them o Provided a way to launch configure for devices that support it o Improved the "Most Recent" list handling o Using a tabbed notebook interface for the device monitor o Added a Modbus page for devices that support it o Added a field for MEI (Multi Electric Interface) o Added fields for Variable Power o Removed the Administrative Status field o Removed the Operational Status field 4. BUG FIXES o Fixed some error handling problems o Fixed window centering problems 5. KNOWN LIMITATIONS o Online help is only one page of general information o Name resoving on Windows is sluggish. Users can turn off the name resolver via the options dialog. o ADDP may be disabled on operating systems other than Windows and Linux-intel. Check support.digi.com for updated versions of Digi Port Authority - Remote that include ADDP for your OS. 6. ADDITIONAL INFORMATION, General o The Digi Port Authority - Remote package can be downloaded from the Digi ftp site. Refer to the Part Number Table in Section 1 of these Release Notes for the Part Number used for each operating system. 7. INSTALLATION INSTRUCTIONS The Digi Port Authority - Remote package is installed by issuing the following command: pkgadd -d //40002189_.pkg Note that Digi part number versioning WILL NOT MATCH package versioning. Part number versions will be in the form 40002189_A, 40002189_A1, 40002189_B, etc. Package versioning is in the form Vx.y, where x is the major release level and y is the minor release level. The package is installed on the target machines as "digidpar" and the package version can be displayed by issuing the following command: pkginfo -x digidpar o Digi Port Authority - Remote (dparemote) is installed in /opt/dg and includes a man page for dparemote. Detailed help is available within the dparemote GUI and on the Digi International website. 8. HISTORY o Sept 29, 2001 Enhancements: o Split common release notes into one per OS Bug Fixes: o Fixed RPM install for Connectiva o Sept 14, 2001 - Initial release Enhancements: o Added labels that display each graph's current value o Added tab/shift-tab navigation to the port/net monitors o Improved graph scales Bug Fixes: o Solaris: Changed owner:group to root:sys for all files o AIX: Fixed a package installation problem o All OS distributions: Included the man page in the distribution o Improved scrolled frame. The one used in beta had problems with focus and resizing o July 9, 2001 - Initial beta release