XBee Network Assistant

                          Release Notes (PN 93001307_B)
                                  Build 1.0.1.7
                                  May 23, 2019

                        (c) Digi International Inc. 2018, 2019
                               http://www.digi.com

Introduction
--------------------------------------------------------------------------------
This document provides the latest release information for XBee Network 
Assistant, the solution to deploy and manage Digi XBee networks in an easy 
and quick way.

XBee Network Assistant 1.0.1, May 2019
--------------------------------------------------------------------------------
1. Changes with respect to previous version
    * Added support to latest XBee3 RF modules and firmware versions.
    * Added support to Google Maps in China.
    * Fixed an issue when loading a network.
    * Fixed an issue when trying to configure the network settings in DigiMesh.

2. Supported Operating Systems
   XBee Network Assistant currently supports the following Operating Systems:
    * Microsoft Windows XP/Vista/7/10 (32 and 64 bits)

      For additional information about the system requirements, refer to the 
      built-in documentation.

3. Supported RF Modules
   XBee Network Assistant is compatible with the following XBee radio modules 
   in the XBee/XBee-PRO RF Module Family:
    * XBee SX (regular and PRO versions)
    * XBee S1 (regular and PRO versions)
    * XBee S2
    * XBee S2B
    * XBee S2C (regular and PRO versions)
    * XBee 868LP
    * XBee 868LP SX (regular and PRO versions)
    * XBee3

4. Known Issues and Limitations
    * The XBee device that you use to access the network must:
        * Operate in API or API escape mode. If you try to add a device
          configured in transparent mode (AT), the application shows an
          error message but allows you to change the mode.
        * Not be an end device. The discovery process is not supported for
          this type of devices.
        * Not be a coordinator, if working with ZigBee networks. Management
          of routes and connections is limited with this device type.
    * The XBee device that you use to access a ZigBee network should NOT:
        * Be an S2/S2B. Due to hardware limitations, it is possible for the
          network not to be fully discovered. An S2C (or greater) hardware
          version should be used, instead.


XBee Network Assistant 1.0.0, March 2018
--------------------------------------------------------------------------------
1. Changes with respect to previous version
   Everything. First public release.

2. Supported Operating Systems
   XBee Network Assistant currently supports the following Operating Systems:
    * Microsoft Windows XP/Vista/7/10 (32 and 64 bits)

      For additional information about the system requirements, refer to the 
      built-in documentation.

3. Supported RF Modules
   XBee Network Assistant is compatible with the following XBee radio modules 
   in the XBee/XBee-PRO RF Module Family:
    * XBee SX (regular and PRO versions)
    * XBee S1 (regular and PRO versions)
    * XBee S2
    * XBee S2B
    * XBee S2C (regular and PRO versions)
    * XBee 868LP
    * XBee 868LP SX (regular and PRO versions)
    * XBee3

4. Known Issues and Limitations
    * The XBee device that you use to access the network must:
        * Operate in API or API escape mode. If you try to add a device
          configured in transparent mode (AT), the application shows an
          error message but allows you to change the mode.
        * Not be an end device. The discovery process is not supported for
          this type of devices.
        * Not be a coordinator, if working with ZigBee networks. Management
          of routes and connections is limited with this device type.
    * The XBee device that you use to access a ZigBee network should NOT:
        * Be an S2/S2B. Due to hardware limitations, it is possible for the
          network not to be fully discovered. An S2C (or greater) hardware
          version should be used, instead.