XBee Multi Programmer

                          Release Notes (PN 93000818_D)
                                  Build 1.2.0.2
                                October 15, 2019

                      (c) Digi International Inc. 2018, 2019
                               http://www.digi.com

Introduction
--------------------------------------------------------------------------------
This document provides the latest release information for XBee Multi Programmer, 
the solution to program specific profiles and firmware in multiple Digi
International XBee radio modules in an easy and quick way.

XBee Multi Programmer 1.2.0, October 2019
--------------------------------------------------------------------------------
1. Changes with respect to previous version
    * Added a mechanism to execute pre and post scripts before and after
      programming each XBee module.
   
    * Other bug fixes and improvements
      See the Change log within XBee Multi Programmer for more information.

2. Supported Operating Systems
   XBee Multi Programmer currently supports the following Operating Systems:
    * Microsoft Windows XP/Vista/7/10 (32 and 64 bits)

      For additional information about the system requirements, refer to the 
      built-in documentation.

3. Supported RF Modules
   XBee Multi Programmer is compatible with the following XBee radio modules in
   the XBee/XBee-PRO RF Module Family:
    * XBee3 Zigbee 
    * XBee3 DigiMesh
    * XBee3 802.15.4
    * XBee3 Cellular LTE CAT 1
    * XBee3 Cellular LTE-M/NB-IoT
    * XBee Cellular LTE Cat 1
    * XBee Cellular 3G
    * XBee S2C
    * XBee SX
    * XBee SX 868
    * XBee 900HP
    * XBee XSC
    * XBee Wi-Fi

4. Known Issues and Limitations
    * It is not possible to update XBee Cellular LTE Cat 1 modules to firmware
      versions lower than 100A.
    * If you use pre/post scripts to communicate with an XBee device over the
      serial port, you must implement a retry system to ensure a more robust
      connection with the target module. The FTDI D2XX library, used by XBee
      Multi Programmer, locks the access to all ports when opening any of them.
      This could cause the port you are trying to access to be in use when your
      script tries to open the connection.


XBee Multi Programmer 1.1.1, April 2019
--------------------------------------------------------------------------------
1. Changes with respect to previous version
    * Fixed an issue in the profile viewer.
      See the Change log within XBee Multi Programmer for more information.

2. Supported Operating Systems
   XBee Multi Programmer currently supports the following Operating Systems:
    * Microsoft Windows XP/Vista/7/10 (32 and 64 bits)

      For additional information about the system requirements, refer to the 
      built-in documentation.

3. Supported RF Modules
   XBee Multi Programmer is compatible with the following XBee radio modules in
   the XBee/XBee-PRO RF Module Family:
    * XBee3 Zigbee 
    * XBee3 DigiMesh
    * XBee3 802.15.4
    * XBee3 Cellular LTE CAT 1
    * XBee3 Cellular LTE-M/NB-IoT
    * XBee Cellular LTE Cat 1
    * XBee Cellular 3G
    * XBee S2C
    * XBee SX
    * XBee SX 868
    * XBee 900HP
    * XBee XSC
    * XBee Wi-Fi

4. Known Issues and Limitations
    * It is not possible to update XBee Cellular LTE Cat 1 modules to firmware
      versions lower than 100A.


XBee Multi Programmer 1.1.0, February 2019
--------------------------------------------------------------------------------
1. Changes with respect to previous version
    * Added support for the following devices:
       - XBee3 Cellular LTE CAT 1
       - XBee3 Cellular LTE-M/NB-IoT
   
    * Added support for profiles with attached file system. Profile viewer has 
      been reworked to display it.
   
    * Other bug fixes and improvements
      See the Change log within XBee Multi Programmer for more information.

2. Supported Operating Systems
   XBee Multi Programmer currently supports the following Operating Systems:
    * Microsoft Windows XP/Vista/7/10 (32 and 64 bits)

      For additional information about the system requirements, refer to the 
      built-in documentation.

3. Supported RF Modules
   XBee Multi Programmer is compatible with the following XBee radio modules in
   the XBee/XBee-PRO RF Module Family:
    * XBee3 Zigbee 
    * XBee3 DigiMesh
    * XBee3 802.15.4
    * XBee3 Cellular LTE CAT 1
    * XBee3 Cellular LTE-M/NB-IoT
    * XBee Cellular LTE Cat 1
    * XBee Cellular 3G
    * XBee S2C
    * XBee SX
    * XBee SX 868
    * XBee 900HP
    * XBee XSC
    * XBee Wi-Fi

4. Known Issues and Limitations
    * It is not possible to update XBee Cellular LTE Cat 1 modules to firmware
      versions lower than 100A.


XBee Multi Programmer 1.0.1, February 2018
--------------------------------------------------------------------------------
1. Changes with respect to previous version
   Everything. First public release.

2. Supported Operating Systems
   XBee Multi Programmer currently supports the following Operating Systems:
    * Microsoft Windows XP/Vista/7/10 (32 and 64 bits)

      For additional information about the system requirements, refer to the 
      built-in documentation.

3. Supported RF Modules
   XBee Multi Programmer is compatible with the following XBee radio modules in
   the XBee/XBee-PRO RF Module Family:
    * XBee3
    * XBee Cellular LTE Cat 1
    * XBee Cellular 3G
    * XBee S2C
    * XBee SX
    * XBee SX 868
    * XBee 900HP
    * XBee XSC
    * XBee Wi-Fi

4. Known Issues and Limitations
    * It is not possible to update XBee Cellular LTE Cat 1 modules to firmware
      versions lower than 100A.