Release Notes 93000371_F
				
			Digi PortServer TS MIB
			     40002194_F
                                            
                            04/09/2003

1.  INTRODUCTION

The PortServer TS MIB was designed for use with network managment
stations or any other SNMP based application which can read SMIv1
formatted MIB files. It complements the supported 
standard mibs, RFC1213, RFC1658, and RFC1659.

The OID registration for the root of the PortServer TS MIB is 
provided by the DIGI-SMI MIB, and, consequently, the DIGI-SMI
is required for proper operation on most managment applications.

The PortServer TS MIB complies with SMIv1 syntax, compatible
with most applications which utilize MIBs. 	


2.  SUPPORTED PRODUCTS

    Terminal Servers:
      PortServer TS Family
      Digi One RealPort
      Digi One TS
      Digi One IA RealPort
      
3.  ENHANCEMENTS

    Added:
    o DHCP Ignore Keepalive OID
    o Secure RealPort Number OID
    o Radius Primary Authentication Socket OID
    o Radius Secondary Authentication Socket OID
    o Radius Primary Accounting Socket OID
    o Radius Secondary Accounting Socket OID
    o SNMP linkUp trap enable/disable OID
    o SNMP coldStart trap enable/disable OID

4.  BUG FIXES

    o None


5.  KNOWN LIMITATIONS

    o None


6.  ADDITIONAL INFORMATION, General

    o The Digi PortServer TS MIB can be downloaded from the Digi web and 
      ftp sites.
      

7.  HISTORY

    o Feb 5, 2003
        o Added OID for Ethernet Speed and Duplex
        o Replaced IP-based Ports/Users Auto Destination OID with 
          Hostnamed-based OID
        o Added Power device type for TS 8/16 platforms
        o Added Psuedo-Modem device type
        o Added OID for Root Prompt for Command Line
        o Added OIDs for Network Login Prompts
        o Added OIDs for Outgoing Serial Power over RI and DTR

    o July 17, 2002
	o Added serial parameter reversion OID

    o Mar 26, 2002
	o Added force DCD registration to the flowTable.
	o Added PPP specific settings to the user table.
	o Added device and script tables.

    o Jan 09, 2002
	o Added escape character OID registrations to the userTable
    
    o Sept 14, 2001 - Initial release