                   Release Notes PN 93000441

         Digi EtherLite Configuration Utility (DgIpServ)
                       Version 2.5.67.0

                 Software Package PN 40002241

                          08/07/2002


  CONTENTS

  Section      Description
  -------------------------------
  1            Introduction
  2            Supported Products
  3            Known Limitations
  4            Additional Notes
  5            History


  1. INTRODUCTION

     This document describes the Digi EtherLite Configuration
     Utility (DgIpServ). With DgIpServ you can perform the
     following operations to configure your EtherLite device:

     o Store IP settings
       Choose Store IP settings to assign an IP address,
       subnet mask, and default gateway to an EtherLite for the
       first time. Ask your network administrator for this information.

     o Erase IP settings
       Choose Erase IP settings to erase IP settings without
       assigning new ones.

     o Change IP settings
       Choose Change IP settings to simultaneously erase and
       assign new IP settings.

     o Update Firmware
       Choose Update Firmware to apply an update you downloaded
       from the Digi Support Web site (http://support.digi.com).

     Refer to the following number when searching the Digi
     International Inc. Web site (www.digi.com) or the FTP
     site (ftp.digi.com) for the latest software package:

     40002241_<highest revision letter>


  2. SUPPORTED PRODUCTS

     Model                  Number of Ports
     --------------------------------------
     EtherLite   2                 2
     EtherLite   8                 8
     EtherLite  16                16
     EtherLite  32                32
     EtherLite  80                 8
     EtherLite 160                16
     EtherLite 162                16

  3. KNOWN LIMITATIONS

     None.


  4. ADDITIONAL NOTES

     1. Unzip the archive to a folder of your choice.
     2. Run DGIPCLN.CMD to remove previous versions of DGIPSERV.
     3. Run DGIPSERV.EXE and follow the instructions on the screen.

     On-line help is available when you install the product.


  5. HISTORY

     Version 2.5.67.0 -- Production release, Rev. B
     ----------------

     August 7, 2002

     o Fixed: After updating the firmware on any Etherlite with the
       DGIPSERV utility the Gateway and Subnet Mask are erased.
     o Fixed DGIPSERV issue with systems having multiple IP addresses
       (either because multiple Network Interface Adapters are installed
       or a VPN connection is established). Added a dialog that asks in
       this special case for the network interface to use.
     o Changed: The gateway address in DGIPSERV is set to 0.0.0.0 now,
       instead of clearing it upon dialog initialization.
     o Added support for the relay ip address (giaddr) in DHCP/BOOTP
       broadcast packets.
     o Fixed: After updating the firmware on any Etherlite with the
       DgIpServ utility the Gateway and Subnet Mask are erased. (#7727)
     o Fixed DGIPSERV issue with systems having multiple IP addresses
       (either because multiple Network Interface Adapters are installed
       or a VPN connection is established).(#7826)
     o Added DGIPCLN.CMD to remove previous version from the system.

     Version 2.4.46.0 -- Production release, Rev. A
     ----------------

     April 4, 2002

     o Initial release as stand-alone software package.
