Digi International  
 
status message text
error message text

 

XBee Configuration

Return to Network View
 
Extended Address:   1  
Product Type:   1  
Firmware Version:   1  
 

Unable to access the gateway RF module.

Either there is no module installed or the installed module is not recognized.

Settings are not configurable for this device.

Basic Radio Settings

PAN ID (ID):     hex (0x0-0xffff, 0xffff=any PAN ID)  
Extended PAN ID (ID):     8 hex bytes  
  Setting to 0 allows a random extended PAN ID to be used.
  Note: Changing the PAN ID may make this node inaccessible.
Node Identifier (NI):    
Discover Timeout (NT):    tenths of second (1-255)  
Scan Channels (SC):    hex (0xffff=all channels)  
Scan Duration (SD):    (0-7)  

Advanced Radio Settings

Transmit Power Level (PL):    
Allows Join Time (NJ):    seconds (0-255. 255=always)  
CCA Threshold (CA):    -dBm (36-80)  
Random Delay Slots (RN):    (0-3, 0=disabled)  
Broadcast Hops (BH):    (0-30, 0=maximum)  
RSSI PWM (P0):    Enable RSSI PWM  
RSSI Timer (RP):    tenths of second (0-255)  
Associate LED (D5):    

Serial Interface Settings

Baud Rate (BD):    
Parity (NB):    
Flow Control (D7):    Enable CTS Flow Control (DIO7)  
Packetization Timeout (RO):    msecs (0-255, 0=immediate)  
Tab Close

Advanced Settings

Copyright © 1996-2006 Digi International, Inc. All rights reserved.