| RabbitCore RCM2200 User's Manual |
Introduction & Overview
- 1.1 Definitions
- 1.2 DeviceMate Hardware
- 1.2.1 DeviceMate Capabilities
- 1.3 Development Software
- 1.4 How to Use This Manual
- 1.4.1 Additional Information
- 1.4.2 Online Documentation
Hardware Setup
- 2.1 Development Kit Contents
- 2.2 Overview of the Demonstration Board
- 2.2.1 Demonstration Board Features
- 2.2.2 Demonstration Board Expansion
- 2.3 Development Hardware Connections
- 2.3.1 Attach Modules to Demonstration Board
- 2.3.2 Connect Programming Cable
- 2.3.3 Connect Power
- 2.4 Where Do I Go From Here?
- 2.4.1 Technical Support
Software Installation & Overview
- 3.1 System Requirements
- 3.1.1 Hardware Requirements
- 3.2 Installing Dynamic C
- 3.3 Starting Dynamic C
- 3.3.1 Communication Error Messages
- 3.4 Sample Programs
- 3.4.1 RCM2200 Hardware Platform
- 3.4.2 RCM2300 Target Device
- 3.4.3 Prepare DeviceMate Hardware Platform
DeviceMate Sample Programs
- 4.1 Ethernet Network Cables
- 4.1.1 Ethernet Connections
- 4.1.2 Ethernet Networks
- 4.2 Running TCP/IP Sample Programs
- 4.2.1 How to Set IP Addresses in the Sample Programs
- 4.2.2 How to Set Up your Computer's IP Address for Direct Connect
- 4.2.3 Run the PINGME.C Demo
- 4.3 DeviceMate Dynamic C Libraries and Sample Programs
- 4.3.1 Serving Web Pages
- 4.3.2 FileSystem Access
- 4.3.3 Running Your Own Set-Up
- 4.3.4 Reference Info
- 4.4 Where Do I Go From Here?
Appendix A. RabbitCore Specifications
- A.1 Electrical and Mechanical Characteristics
- A.1.1 RCM2200
- A.1.2 RCM2300
- A.2 Pinouts
- A.3 Serial Communication
Appendix B. nonRabbit-Based Target Connections
- B.1 Hookup Instructions
- B.2 Connector Pinouts
- B.3 Serial Communication
- B.4 Sample Program
- B.5 Where Do I Go From Here?
Appendix C. Programming Cable
Schematics
| Z-World http://www.zworld.com Voice: (530) 757-3737 FAX: (530) 753-5141 sales@zworld.com |
Rabbit Semiconductor http://www.rabbitsemiconductor.com Voice: (530) 757-8400 FAX: (530) 757-8402 sales@rabbitsemiconductor.com |