| Smartcat (BL2100) User's Manual |
1. Introduction
- 1.1 BL2100 Description
- 1.2 BL2100 Features
- 1.3 Optional Add-Ons
- 1.4 Development and Evaluation Tools
- 1.4.1 Tool Kit
- 1.4.2 Software
2. Getting Started
- 2.1 BL2100 Connections
- 2.2 Installing Dynamic C Premier
- 2.3 Starting Dynamic C
- 2.4 PONG.C
- 2.5 Where Do I Go From Here?
3. Subsystems
- 3.1 BL2100 Subsystems
- 3.1.1 Headers and Screw Terminals
- 3.2 Digital I/O
- 3.2.1 Digital Inputs
- 3.2.2 Digital Outputs
- 3.3 Serial Communication
- 3.3.1 RS-232
- 3.3.2 RS-485
- 3.3.3 Programming Port
- 3.3.4 Ethernet Port
- 3.4 A/D Converter Inputs
- 3.5 D/A Converter Outputs
- 3.6 Analog Reference Voltage Circuit
- 3.7 Memory
- 3.7.1 SRAM
- 3.7.2 Flash Memory
- 3.8 External Interrupts
4. Software
- 4.1 Programming Cable
- 4.1.1 Switching Between Program Mode and Run Mode
- 4.1.2 Detailed Instructions: Changing from Program Mode to Run Mode
- 4.1.3 Detailed Instructions: Changing from Run Mode to Program Mode
- 4.2 BL2000 Libraries
- 4.2.1 Library Directories
- 4.3 BL2100 Function APIs
- 4.3.1 Board Initialization
- 4.3.2 Digital I/O
- 4.3.3 Serial Communication
- 4.3.4 A/D Converter Inputs
- 4.3.5 D/A Converter Outputs
- 4.4 Sample Programs
- 4.4.1 Digital I/O
- 4.4.2 Serial Communication
- 4.4.3 A/D Converter Inputs
- 4.4.4 D/A Converter Outputs
- 4.4.5 Using Calibration Constants
- 4.4.6 TCP/IP Sample Programs
- 4.4.7 LCD/Keypad Module Sample Programs
5. Using the TCP/IP Features
- 5.1 TCP/IP Connections
- 5.2 TCP/IP Sample Programs
- 5.2.1 How to Set IP Addresses in the Sample Programs
- 5.2.2 How to Set Up your Computer's IP Address for a Direct Connection
- 5.2.3 Run the PINGME.C Demo
- 5.2.4 Running More Demo Programs With a Direct Connection
- 5.3 Where Do I Go From Here?
Appendix A. Specifications
- A.1 Electrical and Mechanical Specifications
- A.2 Conformal Coating
- A.3 Jumper Configurations
- A.4 I/O Address Assignments
Appendix B. Power Supply
- B.1 Power Supplies
- B.1.1 Power for Analog Circuits
- B.2 Batteries and External Battery Connections
- B.2.1 Replacing the Backup Battery
- B.2.2 Battery-Backup Circuit
- B.2.3 Power to VRAM Switch
- B.2.4 Reset Generator
- B.3 Chip Select Circuit
Appendix C. LCD/Keypad Module
- C.1 Specifications
- C.2 Mounting LCD/Keypad Module on the BL2100
- C.3 Keypad Labeling
- C.4 Header Pinouts
- C.4.1 I/O Address Assignments
- C.5 Programming Cable Tips
- C.6 LCD/Keypad Module Function APIs
- C.6.1 LEDs
- C.6.2 LCD Display
- C.6.3 Keypad
- C.7 Sample Programs
Appendix D. Plastic Enclosure
- D.1 Assembly
- D.2 Dimensions
Appendix E. Demonstration Board
- E.1 Connecting Demonstration Board
Appendix F. Programming Cable
Index 109
| Z-World http://www.zworld.com Voice: (530) 753-3737 FAX: (530) 753-5141 sales@zworld.com |