XLR PRO
--------------

Customer Release Notes
----------------------

Copyright (C) 2015, Digi International

- - - - - - - - - - - - - - - - - - - -

### Overview:

These release notes document changes made to the firmware on the XLR PRO radio modem.

### Links:

[Product Information](http://www.digi.com/products/wireless-modems-peripherals/wireless-range-extenders-peripherals/digi-xlr-pro)
[Documentation](http://www.digi.com/products/wireless-modems-peripherals/wireless-range-extenders-peripherals/digi-xlr-pro#docs)
[Support](http://www.digi.com/support/productdetail?pid=5603)

### Compatible Hardware:

* XLR PRO
	* XL9

- - - - - - - - - - - - - - - - - - - -

### Release Version:

* 1007 - XLR PRO (North America)
* 1207 - XLR PRO (International)

### Release Date:

* 2015-November-30

### New Features:

* USB serial port support

* Added ping command - ATPG

* Firmware updates through the web UI auto filter to .ebin file type


### Bug Fixes:

* Fixed an issue where the XLR PRO RF would lockup during bridging mode

### Known Issues / Errata:

* With bridging enabled, DHCP does not renew if the XLR is moved to a different network.
	* Workaround: When switching Ethernet cables, reset the device
	
- - - - - - - - - - - - - - - - - - - -

### Release Version:

* 1006 - XLR PRO

### Release Date:

* 2015-April-21

### New Features:

* Improved RF narrow band suppression

### Bug Fixes:

* Corrected default socket baud rate (ATIB)

* Fix a bug where the webpage couldn't be closed if username/password was unknown

* Updated how XLR PRO transmit options are displayed on the web page and Device Cloud

* Fixed a bug where RS-485 would not function after a power cycle

* Fixed a bug where IP bridging was loosing data

* Fixed a firmware update issue for the case where power is lost during a small window between
  loading the firmware to GPM and loading the firmware to working flash.

* Fixed a firmware update issue caused by watch dog resets when using XCTU-NG

* Fixed a problem with entering command mode immediately after timing out of command mode.

* Fixed a problem with entering bridging mode destination address through Web page without filling
  in leading zeroes.

* Fixed a problem with GPM reads being unreliable.

* Updated the device cloud connector default to use devicecloud.digi.com.

### Known Issues / Errata:

* With bridging enabled, DHCP does not renew if the XLR is moved to a different network.
	* Workaround: When switching Ethernet cables, reset the device
	
- - - - - - - - - - - - - - - - - - - -

### Release Version:

* 1003 - XLR PRO

### Release Date:

* 2014-Sep-08

### New Features:

* Initial release

### Bug Fixes:

* None

### Known Issues / Errata:

* With bridging enabled, DHCP does not renew if XLR is moved to a different network.
	* Workaround: When switching Ethernet cables, reset the device

* It is possible to lock the XLR PRO serial port so that all input is ignored. This happens when a
  firmware update is attempted with old XCTU as opposed to XCTU-NG
  Workaround:
	* Don't ever load XLR PRO firmware with old X-CTU.
	* If old X-CTU is made by mistake, request tech support for a compatible version of firmware
	  that can be loaded with old X-CTU. Then load proper version with XCTU-NG