====================================================================================================
                                           XBee-PRO 900HP

                                       Customer Release Notes

                                Copyright (C) 2014, Digi International
====================================================================================================
----------------------------------------------------------------------------------------------------
Release Date:     2014-04-14
Release Versions: 1070,8070


+--------------+
| New Features |
+--------------+

+-----------+
| Bug Fixes |
+-----------+
  - Some DigiMesh features were erroneously enabled on the 10k build.

  - ATST was changing on power cycle.

  - Fixed a problem with voltage and temperature reading. This could potentially affect RF
    performance as well as the AT%V and ATTP commands.

  - Fixed an encryption bug, where under heavy load the incorrect key was used.


+-----------------------+
| Known Issues / Errata |
+-----------------------+
 - No SPI data should be transmitted or received while an ATWR is in progress.  Data could be lost.



----------------------------------------------------------------------------------------------------
Release Date:     2014-01-07
Release Versions: 106A, 806A

+--------------+
| New Features |
+--------------+
  - Added the ATN? command which returns the timeout for the Network Discovery (ND) and Discover
    Node (DN) commands.


+-----------+
| Bug Fixes |
+-----------+
 - Fixed an issue with the Associate LED which was off during a 30 second wakeup initiated by a 
   single commissioning button press.

 - Fixed an issue that caused the node to lock up when directed broadcasts were forwarded.


+-----------------------+
| Known Issues / Errata |
+-----------------------+
 - No SPI data should be transmitted or received while an ATWR is in progress.  Data could be lost.



----------------------------------------------------------------------------------------------------
Release Date:     2012-07-24
Release Versions: 1067, 8067

This is the initial public release of the XBee-PRO 900HP RF Modules.



+-----------------------+
| Known Issues / Errata |
+-----------------------+
 - Networking: The Aggregate Addressing (AG) command does not work properly.
 - SPI/UART: Outgoing SPI on SPI module locks up when sending it an AT command immediately followed
   by a WR command.  Users who wish to send an ATWR command using the SPI interface should avoid
   sending data to the SPI for 500ms before and after the ATWR command.
 - SPI/UART: Sending a large number of broadcasts in rapid succession to a SPI module can cause a
   module operating in SPI mode to stop transmitting and receiving.