==================================================================================================== Customer Release Notes XBee XSC S3B RF Modules Copyright (C) 2011-2013, Digi International ==================================================================================================== Release Date: July 31, 2013 Release Versions: 3010 - XBEE-PRO XSC (S3B) 9600 3110 - XBEE-PRO XSC (S3B) 19200 3210 - XBEE-PRO XSC (S3B) 9600 920MHz 3310 - XBEE-PRO XSC (S3B) 19200 920MHz +---------------+ | Special Notes | +---------------+ - Cumulative release notes since version 3x0F was released. +--------------+ | New Features | +--------------+ - Pin 7 has been disabled +-----------+ | Bug Fixes | +-----------+ - Fixed a bug where when used in RS-485 CTS was de-asserting before data transmission completed. +-----------------------+ | Known Issues / Errata | +-----------------------+ Serial Port Sleep Mode (ATSM2) is not currently supported A number of AT commands can be set to invalid values without issuing an error. The user should not attempt to set AT commands to values other than those specifed in the product manual or .mxi file. Multi-Streaming connections are not supported with the following related commands: ATCB, ATCE, ATCF, ATCL, ATCM, ATDC, ATMD1, ATMD2 IO Line Passing is not supported with the related commands: ATBK, ATBO, ATCO, ATDR, ATIU, ATTO ==================================================================================================== Release Date: June 11, 2013 Release Versions: 300F - XBEE-PRO XSC (S3B) 9600 310F - XBEE-PRO XSC (S3B) 19200 320F - XBEE-PRO XSC (S3B) 9600 920MHz 330F - XBEE-PRO XSC (S3B) 19200 920MHz +---------------+ | Special Notes | +---------------+ - Cumulative release notes since version 3x0D was released. +--------------+ | New Features | +--------------+ +-----------+ | Bug Fixes | +-----------+ - Fix a bug where binary commands were being sent as data. +-----------------------+ | Known Issues / Errata | +-----------------------+ Serial Port Sleep Mode (ATSM2) is not currently supported A number of AT commands can be set to invalid values without issuing an error. The user should not attempt to set AT commands to values other than those specifed in the product manual or .mxi file. Multi-Streaming connections are not supported with the following related commands: ATCB, ATCE, ATCF, ATCL, ATCM, ATDC, ATMD1, ATMD2 IO Line Passing is not supported with the related commands: ATBK, ATBO, ATCO, ATDR, ATIU, ATTO ==================================================================================================== Release Date: August 16, 2012 Release Versions: 300D - XBEE-PRO XSC (S3B) 9600 310D - XBEE-PRO XSC (S3B) 19200 320D - XBEE-PRO XSC (S3B) 9600 920MHz 330D - XBEE-PRO XSC (S3B) 19200 920MHz +---------------+ | Special Notes | +---------------+ - Cumulative release notes since version 3x0C was released. +--------------+ | New Features | +--------------+ - This release was created to support an updated manufacturing procedure. This updated procedure allows the customer to switch between XSC code and 900HP code on the same hardware. From the customers' perspective there are no changes in behavior between version 3x0C and 3x0D except that the version number has changed. +-----------+ | Bug Fixes | +-----------+ +-----------------------+ | Known Issues / Errata | +-----------------------+ Serial Port Sleep Mode (ATSM2) is not currently supported A number of AT commands can be set to invalid values without issuing an error. The user should not attempt to set AT commands to values other than those specifed in the product manual or .mxi file. Multi-Streaming connections are not supported with the following related commands: ATCB, ATCE, ATCF, ATCL, ATCM, ATDC, ATMD1, ATMD2 IO Line Passing is not supported with the related commands: ATBK, ATBO, ATCO, ATDR, ATIU, ATTO ==================================================================================================== Release Date: April 20, 2012 Release Versions: 300C - XBEE-PRO XSC (S3B) 9600 310C - XBEE-PRO XSC (S3B) 19200 320C - XBEE-PRO XSC (S3B) 9600 920MHz 330C - XBEE-PRO XSC (S3B) 19200 920MHz +---------------+ | Special Notes | +---------------+ - Cumulative release notes since version 3x09 was released. +--------------+ | New Features | +--------------+ +-----------+ | Bug Fixes | +-----------+ - Fixed bug with the ATAM command where the assigned MY was not formed in the way described in the product manual. The incorrect method often resulted in non-unique ATMY assignments. - Fixed bug where, after entering command mode by asserting a serial break during reset, the UART would not getting initialized to the values written in flash (it continued to use the default baud after exiting command mode) - Fixed bug where the parity setting was not the default (no parity) when entering command mode via a serial break on reset. - Fixed a bug where sending a packet at near the max RF payload size when 9-bit data (ATNB5) was enabled would fail. - Fixed a bug where 9-bit data could be corrupted after entering and exiting command mode. (Especially when entering command mode on power-up via a serial break.) - Fixed a bug where the command character sequence (+++) would be transmitted over-the-air if entered while the radio was sending a transmission. - Fixed some minor mistakes in the .mxi file. (This file is used in the X-CTU modem configuration tab) - Fixed a bug where receiving UART data which had parity or framing errors would cause invalid data to go over-the-air. - Fixed a bug where changes enabling RSSI PWM output with the ATRP command would not take effect until after an ATWR and reset. +-----------------------+ | Known Issues / Errata | +-----------------------+ Serial Port Sleep Mode (ATSM2) is not currently supported A number of AT commands can be set to invalid values without issuing an error. The user should not attempt to set AT commands to values other than those specifed in the product manual or .mxi file. Multi-Streaming connections are not supported with the following related commands: ATCB, ATCE, ATCF, ATCL, ATCM, ATDC, ATMD1, ATMD2 IO Line Passing is not supported with the related commands: ATBK, ATBO, ATCO, ATDR, ATIU, ATTO ==================================================================================================== Release Date: January 17, 2012 Release Versions: 3009 - XBEE-PRO XSC (S3B) 9600 3109 - XBEE-PRO XSC (S3B) 19200 3209 - XBEE-PRO XSC (S3B) 9600 920MHz 3309 - XBEE-PRO XSC (S3B) 19200 920MHz +---------------+ | Special Notes | +---------------+ - Initial release. +--------------+ | New Features | +--------------+ +-----------+ | Bug Fixes | +-----------+ +-----------------------+ | Known Issues / Errata | +-----------------------+ Serial Port Sleep Mode (ATSM2) is not currently supported A number of AT commands can be set to invalid values without issuing an error. The user should not attempt to set AT commands to values other than those specifed in the product manual or .mxi file. Multi-Streaming connections are not supported with the following related commands: ATCB, ATCE, ATCF, ATCL, ATCM, ATDC, ATMD1, ATMD2 IO Line Passing is not supported with the related commands: ATBK, ATBO, ATCO, ATDR, ATIU, ATTO