+-------------------------------------------------------------------------------+
|                        XBee-PRO XSC Release Notes:                            |
|                                                                               |
|                  Cumulative release notes since version 1020                  |
|                                                                               |
|                    Copyright (C) 2010, Digi International			|
+-------------------------------------------------------------------------------+

Release Date: November 22, 2010
Released Version: 1022

+--------------+
| New Features |
+--------------+


+-----------+
| Bug Fixes |
+-----------+
 - Fixed an RTS flow control bug.

+-----------------------+
| Known Issues / Errata |
+-----------------------+
When using pin sleep, if the SLEEP line is asserted shortly after serial data is received but before a packetization (RO) timeout occurs then the module may go to sleep before sending the outstanding characters.  The outstanding characters will be lost.  To workaround this problem ensure that greater than the RO time is observed after the last serial character is sent to the module before SLEEP is asserted.

Custom baud rate settings between 0xF424 and 0xFFFF do not work correctly.

Custom baud rates actually set with (ATBD) will vary from those set on the XStream.

Serial Port Sleep Mode (ATSM2) is not supported for hardware reasons.

A number of AT commands can be set to invalid values without issuing an error.  The user should not attempt to set AT commands to values other than those specifed in the product manual.


-------------------------------------------------------------------------------

Release Date: Jan 16, 2008
Released Version: 1020

     
+---------------+
| Special Notes |
+---------------+
Initial Release of the XStream 42B5 compatible firmware.

+--------------+
| New Features |
+--------------+


+-----------+
| Bug Fixes |
+-----------+


+-----------------------+
| Known Issues / Errata |
+-----------------------+

Serial Port Sleep Mode (ATSM2) is not supported for hardware reasons.

Custom baud rates actually set with (ATBD) will vary from the XStream.