XBee-PRO XSC
------------

Customer Release Notes
----------------------

Copyright (C) 2015, Digi International

- - - - - - - - - - - - - - - - - - - -

### Overview:

These release notes document changes made to the XSC firmware on the XBee-PRO XSC (S3B) radio.

### Links:

[Product Information](http://www.digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/point-multipoint-rfmodules/xbee-pro-xsc)  
[Documentation](http://www.digi.com/products/wireless-wired-embedded-solutions/zigbee-rf-modules/point-multipoint-rfmodules/xbee-pro-xsc#docs)  
[Support](http://www.digi.com/support/productdetail?pid=3421)

### Compatible Hardware:

* XBee-PRO S3
	* XBP09-XSC

- - - - - - - - - - - - - - - - - - - -

### Release Version:

* 1022 - XBee-PRO XSC 9600

### Release Date:

* 2010-Nov-22

### New Features:

* None

### Bug Fixes:

 - Fixed an RTS flow control bug.

### Known Issues / Errata:

* When using pin sleep, if the SLEEP line is asserted shortly after serial data is received but 
  before a packetization (RO) timeout occurs then the module may go to sleep before sending the 
  outstanding characters. The outstanding characters will be lost. To workaround this problem 
  ensure that greater than the RO time is observed after the last serial character is sent to the 
  module before SLEEP is asserted.

* Custom baud rate settings between 0xF424 and 0xFFFF do not work correctly.

* Custom baud rates actually set with (ATBD) will vary from those set on the XStream.

* Serial Port Sleep Mode (ATSM2) is not supported for hardware reasons.

* A number of AT commands can be set to invalid values without issuing an error. The user should 
  not attempt to set AT commands to values other than those specified in the product manual.

- - - - - - - - - - - - - - - - - - - -

### Release Version:

* 1020 - XBee-PRO XSC 9600

### Release Date:

* 2008-Jan-16

### New Features:

* Initial release of the XStream 42B5 compatible firmware.

### Bug Fixes:

 * None

### Known Issues / Errata:

* Serial Port Sleep Mode (ATSM2) is not supported for hardware reasons.

* Custom baud rates actually set with (ATBD) will vary from the XStream.