Release Notes PN 93000399E
                     Digi One Realport, PortServer TS 2/4 EOS
		                 Digi One IA
				  82000679C
                                  82000716C

                                   2001-1-16

WARNING: When upgrading from a release prior to 82000716B, the POST
must be upgraded before upgrading to the new version of the OS. See
ADDITIONAL INFORMATION

INTRODUCTION

  This is an update release of firmware for the Digi One Realport and
  PortServer TS 2/4.  
 
SUPPORTED PRODUCTS

    Digi One Realport
    PortServer TS 2
    PortServer TS 4

ENHANCEMENTS

    This release adds support for the Digi One IA device.

MANUAL ERRATA

    The manual states that DHCP is only available on the TS-8 and
    TS-16 products.  DHCP is now available on this product.

BUG FIXES

    not applicable

KNOWN LIMITATIONS

    not applicable

ADDITIONAL INFORMATION 

A TFTP server will be required for the following steps:

Upgrading the POST and EOS
--------------------------

When upgrading from a release prior to 82000716B, the POST must be
upgraded before upgrading to the new version of the OS. This can be
done from the OS with the command:

  boot load-post=<tftpserver>:82000679C.bin

A reset is necessary to allow the new POST to run.

  boot action=reset

Upgrade the EOS with the command:

  boot load=<tftpserver>:82000716C.bin

The unit should be reset after the EOS upgrade as well.


---------------------------

Running and Interpreting Digi One Realport PortServer TS 2/4 POST

	(Corrects the Table of LED Activity and indication.)
	
The Power-On/Status LED will flicker at a very fast rate while the Power-
On-Self-Tests are run.  This will take about 6 seconds from when the power 
is applied.  Once the tests are completed, a three-digit status-code is 
flashed on the LED, then the LED is turned on and the device is operational.

	
HISTORY

    2001-01-16
	82000716B

    2001-12-04
	82000677A4

    2001-10-29
	82000677A3
    
    2001-09-20
	82000677A1

    2001-07-11
	Beta Release 1P