Release Notes PN 93000399_D Digi One Realport, PortServer TS 2/4 EOS 82000716_B 2001-12-20 WARNING: When upgrading from a previous release, the POST must be upgraded before upgrading to the new version of the OS. See ADDITIONAL INFORMATION INTRODUCTION This is an update release of firmware for the Digi One Realport and PortServer TS 2/4. SUPPORTED PRODUCTS Digi One Realport PortServer TS 2 PortServer TS 4 ENHANCEMENTS This release adds DHCP support, the ability to load larger firmware images, and the first port may now be reset to 9600 8n1 dev=term. MANUAL ERRATA The manual states that DHCP is only available on the TS-8 and TS-16 products. DHCP is now available on this product. BUG FIXES not applicable KNOWN LIMITATIONS not applicable ADDITIONAL INFORMATION Upgrading the POST When upgrading from a previous release, the POST must be upgraded before upgrading to the new version of the OS. This can be done from the OS with the command: boot load-post=:82000679.bin Running and Interpreting Digi One Realport PortServer TS 2/4 POST (Corrects the Table of LED Activity and indication.) The Power-On/Status LED will flicker at a very fast rate while the Power- On-Self-Tests are run. This will take about 6 seconds from when the power is applied. Once the tests are completed, a three-digit status-code is flashed on the LED, then the LED is turned on and the device is operational. HISTORY 2001-12-04 82000677_A4 2001-10-29 82000677_A3 2001-09-20 82000677_A1 2001-07-11 Beta Release 1P