Release Notes PN 93000960_B

                   Digi Wireless Vehicle Bus Adapter
                             82003264_B EOS
                       Firmware Version 3.2.1.34
                            April 16. 2014

INTRODUCTION

	
   	The Wireless Vehicle Bus Adapter (WVA) is a basic fleet component that makes 
   	vehicle bus data, in either J1939/CAN or J1587/J1708 form, available via wireless 
   	communication. The Adapter is low-cost and simple to install. 
   	It can be used in a desktop development environment with a CAN bus simulator, 
   	and can be mounted in a vehicle by plugging into the CAN bus connector. 
   	The WVA acts as a Wi-Fi Client connecting to a Wi-Fi-enabled Internet-connected 
   	hotspot in the desktop development environment or the vehicle. 
   	It is part of a larger system, including a smart phone, tablet, or other 
   	on-board computer (OBC), where the developer or vehicle driver can interact 
   	with the data provided by the WVA through Wi-Fi.


SUPPORTED PRODUCTS

WVA-J100 Wireless Vehicle Bus Adapter
					 

Firmware Version 3.2.1.34
=========================

HIGHLIGHTED PRODUCT CHANGES

	Remove SSL HeartBeat extension from openssl library (HeartBleed workaround for openssl CVE-2014-0160)

ENHANCEMENTS

	None.	

BUG FIXES

	[DBL-624] - Update OpenSSL to resolve the 'heartbleed' vulnerability


KNOWN ISSUES

	None.

DOCUMENTATION ERRATA

    None.


ADDITIONAL INFORMATION

	The following features are not supported in this release
	 - USB support

	It is recommended that the configurable CAN bitrate be kept at auto under most conditions.  
	It is known that assigning a static CAN bitrate which does not exactly match the rate 
	of the CAN bus can result in malfunction of the device and/or CAN bus.




HISTORY
=======

Firmware Version 3.2.1.33
=========================

HIGHLIGHTED PRODUCT CHANGES

	Initial Release

ENHANCEMENTS

	None.	

BUG FIXES

	None.


KNOWN ISSUES

	None.

DOCUMENTATION ERRATA

    None.


ADDITIONAL INFORMATION

	The following features are not supported in this release
	 - USB support

	It is recommended that the configurable CAN bitrate be kept at auto under most conditions.  
	It is known that assigning a static CAN bitrate which does not exactly match the rate 
	of the CAN bus can result in malfunction of the device and/or CAN bus.




Firmware Version 3.1.2.5
=========================

HIGHLIGHTED PRODUCT CHANGES

	Pilot Release

ENHANCEMENTS

	None.	

BUG FIXES

	None.

KNOWN ISSUES

    Wi-Fi Access point for configuration only.


DOCUMENTATION ERRATA

    None.


ADDITIONAL INFORMATION

	The following features are not available in this pilot release
	 - J1708
	 - USB support
	 - Accelerometer
	 - Final security polices