Release Notes PN 93000955_D

                           ConnectPort X3

                           82002393_D EOS

                          August 14, 2012

IMPORTANT NOTE

   This production release of firmware is incompatible with v2.0.2.0 version. 
   If you are running with v2.0.2.0, please RMA it to get the firmware updated to the latest version.
   
INTRODUCTION

  This is a production release of firmware for the ConnectPort X3 gateway.

  The ConnectPort X3 gateway provides cellular connectivity for devices and
  Digi XBee networks.


SUPPORTED PRODUCTS

  ConnectPort X3

ENHANCEMENTS:
  
  - Socket is available within 30 seconds on power up
  
  - Default Cellular time source is enabled

BUG FIXES:
  
  - Python Auto-start shall be disabled if the python application crashes continuously.
  
  - Time sync failed for cellular time on Vodafone/AT&T network.
  
  - Recovers from persistent Socket timeout and TCP No buffer available errors
  

KNOWN LIMITATIONS

  - Over the Air F/w update of remote XBee's are not supported. However it is supported for local XBee [XBee on Gateway].
  
  - Sleep with XBee networking is not supported. 
  
  - The Python SSL module not supported.
  
  - Failed to recover the socket connectivity after few days and stays disconnect till the device reboot. 
    Use digihw.reboot() in the python application to reboot the device.
  
  
ADDITIONAL INFORMATION

   This production release of firmware is incompatible with any previous version. 
   If you are running with v2.0.2.0, please RMA it to get the firmware updated to the latest version.
   


HISTORY

    82002393_B (3.0.0.2) - August 14, 2012

    See ENHANCEMENTS and BUG FIXES information above.
      
   82002393_2P - February 25, 2010
   82002393_A (2.0.2.0) - October 8, 2010
   82002393_B (3.0.0.2) - April 24, 2012
   82002393_B (3.1.0.1) - May 24, 2012
     - Added AT commands to enable/disable/query state opt-in feature
      a)	To enable opt-in feature at&optin=1
      b)	To disable opt-in feature at&optin=0
      c)	To query the status of opt-in feature at&optin?
    - Opt-in messages are routed to my.idigi.com