Release Notes PN 93000955_C

                           ConnectPort X3

                           82002393_B EOS

                          April 24, 2012

INTRODUCTION

  This is a production release of firmware for the ConnectPort X3 gateway.

  The ConnectPort X3 gateway provides cellular connectivity for devices and
  Digi XBee networks.


SUPPORTED PRODUCTS

  ConnectPort X3

  
ENHANCEMENTS:

  - SMS Support
  - EDP Data Services support
  - iDigi SMS support
  - Device Diagnostic data on iDigi
  - Auto-banding Enabled
  - Time Management through GPS/NTP Server & GSM
  - Supports both variant of Processor [old/new BOM]
  - Improved Python Performance
  - Improved iDigi Connectivity
  - GPS Sampling interval improved to 1 Second.
  - supports digihw.gps_position() API
  - Changed EDP keep-alive defaults to RX=300 and TX=315

BUG FIXES:

  - RTC Sleep issue.
  - GPS LED is ON when 3D fix is recieved.
  - XBee sockets fully support XBS_SO_EP_TX_STATUS
  - CPX3 Hangs after few hours of Application Execution

KNOWN LIMITATIONS

  - Over the Air F/w update of remote XBee's are not supported. However it is supported for local XBee [XBee on Gateway].
  
  - Sleep with XBee networking is not supported. 
  
  - The Python SSL module not supported.

ADDITIONAL INFORMATION

   This production release of firmware is incompatible with any previous version. 
   If you are running with v2.0.2.0, please RMA it to get the firmware updated to the latest version.
   


HISTORY

    82002393_B (3.0.0.2) - April 24, 2012

    See ENHANCEMENTS and BUG FIXES information above.

   82002393_2P - February 25, 2010
   82002393_A (2.0.2.0) - October 8, 2010