Release Notes PN 93000741_C

                         Digi ConnectPort X2e ZB
                           82003021_C EOS
                       Firmware Version 3.0.7.12
                            December 5, 2012


INTRODUCTION

    This is a release of firmware for the Digi ConnectPort X2e ZB. 
	
	The ConnectPort X2e is a small ZigBee to IP gateway that provides low-cost 
	IP networking of RF devices and sensor networks. Featuring an easy development 
	environment, ConnectPort X2e enables custom applications to run locally 
	while interfacing across existing Ethernet/Wi-Fi networks for WAN 
	connectivity to cloud-based software applications.

	The ConnectPort X2e products feature an end-to-end development environment 
	based on the iDigi® Dia framework, allowing for rapid M2M-specific application 
	development on the industry standard Python scripting engine. 
	Digi ESP provides an IDE featuring device detection, debugging, compiling 
	and downloading of iDigi Dia/Python code to Digi gateways. 

	iDigi Manager Pro, a Digi-hosted remote management service, offers a platform 
	for secure, scalable access to an unlimited number of remote assets. 
	In addition, the iDigi web services provide seamless integration from 
	Digi gateways into customer back office applications.


SUPPORTED PRODUCTS

	X2E-Z3C-E1-A	ConnectPort X2e ZB 			Ethernet
	X2E-Z3C-W1-A	ConnectPort X2e ZB Wi-Fi 	Ethernet + Wi-Fi
	X2E-Z3C-E1-W	ConnectPort X2e ZB 			Ethernet International
	X2E-Z3C-W1-W	ConnectPort X2e ZB Wi-FI	Ethernet + Wi-Fi International



Firmware Version 3.0.7.12
=========================

HIGHLIGHTED PRODUCT CHANGES

	Updated hardware and firmware to handle voltage brownouts that caused the gateway to fail to boot


ENHANCEMENTS

	Updated hardware and firmware to handle voltage brownouts that caused the gateway to fail to boot

	Updated Logging, added user readable event log file

	Updated Atheros Wi-Fi driver to version 3.2:  This allows for connections to more enterprise 
	type access points. This also improved detection of local access points. 

	Added additional python extensions to support both RAW and iDigi SMS APIs


BUG FIXES

	Remove unsupported features from iDigi advanced settings:  If device does not support Wi-Fi 
	for example, then the Wi-Fi settings will not be displayed in iDigi

   	Linux XBee driver did not remove requests from the transmit queue when they timed out. 
	This caused the queue to fill and blocked any subsequent requests.  

	Issue #39249: Watchdog & Brownout

	Issue #44812: XBee Join Time (NJ) set default to 255

	Issue #44812: XBee Channel Mask set default to 0x1FFE

	Issue #44878: iDigi is incorrectly asked to discard changes on Xbee Properties tab 

	Issue #44705: Corrected display of CPU usage

	Issue #45036: Enabled serial DMA to better support the Xbee Radio. 
              This enhancement provides plenty of room to avoid the 
              occasional overrun that was being observed.  I
              nterrupt latency is also improved using DMA

	Issue #44501: Enhance handling of starting and stopping processes.


KNOWN ISSUES

    None.


DOCUMENTATION ERRATA

    None.


ADDITIONAL INFORMATION

    None.



HISTORY


Firmware Version 3.0.4.15
=========================

HIGHLIGHTED PRODUCT CHANGES

	None.


ENHANCEMENTS

	None.


BUG FIXES

   	Linux XBee driver did not remove requests from the transmit queue when they timed out. 
	This caused the queue to fill and blocked any subsequent requests.  

KNOWN ISSUES

    None.


DOCUMENTATION ERRATA

    None.


ADDITIONAL INFORMATION

    None.