Release Notes PN 93000660_C
                               Digi ConnectPort LTS Firmware

                            82002228_C (ConnectPort LTS 8 16 32)
                         
                                    v 1.2.0

                             May 31th, 2012

INTRODUCTION

This is the production release of firmware for the ConnectPort LTS
(Linux Terminal Server) products. These devices provide serial over Ethernet 
connectivity for applications today and into the future. They support IPv4 
and IPv6 Ethernet protocols. The ConnectPort LTS MEI product is the same 
size as the ConnectPort LTS (RS-232 only) and is the fastest multi-port 
device with a Multiple Electrical Interface (MEI) in the industry. High-end 
features include Telnet/SSHv2/TCP Sockets protocols, Local, RADIUS and LDAP 
authentication, Port logging through Local, NFS, Samba, Syslog and SD Memory 
cards, keyword monitoring and SMTP/SNMPv3 notification, PPP, USB, XBee, 
Internal modem, Encrypted RealPort,Dual 10/100/1000 mbps Ethernet network, 
interface, Python support and Digi Discovery server to allow discovery and 
network configuration from the Digi Discovery Applet.

SUPPORTED PRODUCTS

    ConnectPort LTS 8 Family
    ConnectPort LTS 16 Family
    ConnectPort LTS 32 Family
    

Enhancements
   - Added support for Dual Power units
   - Changed the logo on the LCD screen.
   - Added a Local profile to the serial port profiles.
   - Enhanced the XML in the config file.
   - Changed the SSH public key upload method to support both file upload and cut and paste methods.
   - Added an option to save network settings when doing a factory reset.
   - Added an option to factory reset the only the serial ports.


Bug Fixes

   - Fixed a problem where XBee hardware test in the bios failed.
   - Fixed a problem where External modem test in the bios failed.
   - Fixed the format of the device ID.
   - Fixed a problem with backup print.
   - Fixed a problem with killing the HTTP/HTTPS process.
   - Fixed a problem where serial signals were displayed incorrectly in Web UI.
   - Fixed a problem with LPD printing.
   - Fixed a security problem where security message was displayed upon failed login attempt.
   - Fixed a problem where 2 processes were showing on a single SSH connection.
   - Fixed a problem where a TCP client connection was not being displayed.
   - Fixed a problem where no gateway was being set for eth1 when source based routing was enabled.
   - Fixed a problem where killing RealPort process was not being blocked.
   - Fixed a problem where RTS toggle in rs422 mode was not working correctly.
   - Added RealPort options to the application section of the Web UI.
   
Known Limitations

    - None

Additional Information

    - None
       
History
08-27-2010
version 1.1.0
Enhancements

    - Added Python support
    - Added XBee support
    - Added build date to firmware tag.

Bug Fixes

    - Fixed a problem when connecting to some serial devices through the CLI.
    - Fixed a problem where only part of the IP address showed at the login prompt of the console port.
    - Fixed a problem with message for SD card detection.
    - Fixed a problem with the command display tcp.
    - Fixed a problem where an ADDP query did not return the DHCP state.
    - Fixed a problem where Uploading files to the device that make the system run of disk space doesn't fail properly.
    - Fixed a problem where ADDP could not reboot the device.
    - Fixed a problem where Trying to access the USB storage device resulted in a error, causing the WebUI to stop responding. 
    
05-11-2010

    - Initial release