Release Notes PN 93000660_B Digi Passport Firmware 82002228_B (ConnectPort LTS 8 16 32) v 1.1.0 August 27th, 2010 INTRODUCTION This is the production release of firmware for the ConnectPort LTS (Linux Terminal Server) products. These devices provide serial over Ethernet connectivity for applications today and into the future. They support IPv4 and IPv6 Ethernet protocols. The ConnectPort LTS MEI product is the same size as the ConnectPort LTS (RS-232 only) and is the fastest multi-port device with a Multiple Electrical Interface (MEI) in the industry. High-end features include Telnet/SSHv2/TCP Sockets protocols, Local, RADIUS and LDAP authentication, Port logging through Local, NFS, Samba, Syslog and SD Memory cards, keyword monitoring and SMTP/SNMPv3 notification, PPP, USB, XBee, Internal modem, Encrypted RealPort,Dual 10/100/1000 mbps Ethernet network, interface, Python support and Digi Discovery server to allow discovery and network configuration from the Digi Discovery Applet. SUPPORTED PRODUCTS ConnectPort LTS 8 Family ConnectPort LTS 16 Family ConnectPort LTS 32 Family Enhancements - Added Python support - Added XBee support - Added build date to firmware tag. Bug Fixes - Fixed a problem when connecting to some serial devices through the CLI. - Fixed a problem where only part of the IP address showed at the login prompt of the console port. - Fixed a problem with message for SD card detection. - Fixed a problem with the command display tcp. - Fixed a problem where an ADDP query did not return the DHCP state. - Fixed a problem where Uploading files to the device that make the system run of disk space doesn't fail properly. - Fixed a problem where ADDP could not reboot the device. - Fixed a problem where Trying to access the USB storage device resulted in a error, causing the WebUI to stop responding. Known Limitations - None Additional Information - None History 05-11-2010 - Initial release