v1.1.36-12 1.fix vpn issue that only less than 4 vpn tunnel estiblished v1.1.36-10 1.fix the issue that fail to upgrade from 1.1.34 to 1.1.36 v1.1.36-8 1.office release v1.1.36 v1.1.36-6 1.support HSO driver for option card 2.support XD950 3.fix AC597E 4.support source option of ip portforwarding v1.1.34-8 1.add rcm communication interval, log interval, GPS interval setttings in WEB UI. v1.1.34-5 1.fix EC360 issue 2.allow the initiate ipsec traffic from wwan 3.add option to enable/disable ipsec service. 4.update rcm client to fix wpa2 setting dont take effect. 5.add default domainname of Wipoint3G which is same with the name of Remote Manager. v1.1.34-4 1.fix EC360 issue 2.allow the initiate ipsec traffic from wwan 3.add option to enable/disable ipsec service. 4.update rcm client to fix wpa2 setting dont take effect. -------------------------------------------------------------------------------------------- V1.1.33-10 1.add comment in the webpage 1200-28800 for ipsec sa,and 1200-86400 for ike sa 2.support EX720 GPS 3.udpate RCM client 4.fix ipsec lifetime dont work 5.remove https wording in webgui 6.add rcm sending interval in webgui -------------------------------------------------------------------------------------------- V1.1.33-6 1.support two japan card:D02NE and AX530IN -------------------------------------------------------------------------------------------- V1.1.32-3 1.fix DDNS ddns-Wildcards error display -------------------------------------------------------------------------------------------- v1.1.32-2 1.add WEBGUI for RCM 2.update RCM client -------------------------------------------------------------------------------------------- v1.1.31-4 1.update some wording in WegGUI -------------------------------------------------------------------------------------------- v1.1.31-2 1.add ping feature which allow user ping from WAN (release 3) 2.support AC597E (release 3) 3.remove some useless word in exported config file (release 3) 4.update some word in WegGUI (release 4) -------------------------------------------------------------------------------------------- V1.1.30-2 1.fix bug which cause AES-128 error when aggressive mode 2.support HUAWEI E660 card 3.fix some WEBUI letter spelling error -------------------------------------------------------------------------------------------- v1.1.29-4 1.add device identity oid 2.remove wifi-psk in oid 3.add warning about IP address in surelink page. -------------------------------------------------------------------------------------------- v1.1.28-24 1.support huawei E660a 2.update mibs oid 3.remove username/password oid 4.default to enable DHCP on wizard page 5.fix reboot issue that cause fail to redirect to home page 6.fix surelink page error 7.support string identity for VPN feature -------------------------------------------------------------------------------------------- V1.1.28-23 1.support GT-Max 7.2 -------------------------------------------------------------------------------------------- V1.1.28-22 1.add EVDO profile in mobile web page 2.fix WEB error which cause fail to submit valid KEY 3.support new cards in Japan: W05K for au CDMA1X win network and C01SI for Softbank HSDPA network -------------------------------------------------------------------------------------------- V1.1.28-19 1.fix error surelink with dns mode. 2.fix surelink page 3.fix IPSEC don¡¯t work when aggressive mode 4.add Country/Channel/more Encrypt way in wizard page 5.add Country/Channel option in wi-fi setting page. 6.fix word error in reboot_status page 7.fix manual mode error in IPSEC -------------------------------------------------------------------------------------------- V1.1.28-14 1.fix word error in mobile.htm and admin_password_config.htm 2.support to display wi-point in google map (click the link of lat&long) 3.fix error that fail to submit page when PIN is disabled in mobile.htm 4.fix wrong redirect link when restore to default 5.fix error that missing to remove lan route when restore to default 6.add option in system_snmp.htm to enable/disable sending trap 7.add validate when submit in system_snmp.htm 8.fix ip filter display error 9.fix bug that cause to fail to reconnect when no trffic -------------------------------------------------------------------------------------------- V1.1.28-8 1.add mobile service profile in Wizard page 2.fix some bug found by DIGI test group a)support to submit single WEP key ; b)update JS code to avoid WPA key warning when submit the Wi-Fi security page. 3.fix some spelling error in web page 4.Update web page according to the warning-list recommended by DIGI 5.Add mobile service provider profile 6.Fix following bug a)TRAP server can not receive trap information from Wi-Point b)Change default value in wizard page to that LAN IP is 192.168.1.1, DHCP range: 192.168.1.2-192.168.1.100 c)Add indicator when setting change in port_config.hml -------------------------------------------------------------------------------------------- V1.1.28-1 1.Configuration -> Mobile -> Mobile Settings i.change "Please Insert WWAN card into slot." to "Please Insert cellular card into slot." 2.Reboot_status.html 1.fix wrong prudct name in reboot_status.htm 3.Configuration -> Mobile -> PPP 1.change following word 2.Leaving it empty means not to special MRU of PPP. 3.Leaving it empty means not to special MTU of PPP. 2.to: i."Leave empty to use the default MRU value." ii."Leave empty to use the default MTU value." 4.Correct the html link of * Mobile Settings -> Mobile Connection Settings -> Status:Interface page " 5.change ¡°AT command ¡° to ¡°CHANGE CELLULAR MODULE DIRECT AT COMMAND LINE¡± 6.change "Allowed & FORBIDDEN" to "Allowed & Excluded" 7.modify the word of ¡°syslog'ing¡± to "syslogging" 8.fix the word of "WIFI" TO "Wi-Fi" 9.modify the word of "Encrypt" to "Encryption" in Wizard page 10.change WEBGUI logo 11.fix the default value to following: 1.LAN ip: 192.168.1.1 2.DHCP range: 192.168.1.2 - 192.168.1.100 3.username/password: root/dbps 12.fix APN issue 13.add ¡°Apply At Once¡± feature and ¡°enable/disabled¡± feature in IP Filter page 14.add indicator information when setting change 15.Remove rcm page 16.move hostname setting into page of Ethernet Wi-Fi Settings 17.Add TRAP in SNMP page 18.add checking when uploading firemware