Release Notes PN 93000444_G Digi One TS, PortServer TS 2/4, TS 2/4 MEI and TS 2/4 H EOS 82000747_J1 May 20, 2003 INTRODUCTION This is a production release of firmware for the Digi One TS and PortServer TS 2/4. These devices provide high-performance serial port connectivity with added MEI support, 802.3af powered Ethernet, and 9-30V DC power. These devices support a 10/100 mbps Ethernet network interface, TCP/IP, Telnet, Reverse Telnet, SNMP, PPP, SSHv2, PortBuffering, ARP-Ping, ADDP, DPA-Remote monitoring tool, and Digi's patented RealPort software for COM or TTY port control and management. SUPPORTED PRODUCTS Digi One TS PortServer TS 2 PortServer TS 4 PortServer TS 2 MEI PortServer TS 4 MEI Digi One TS H PortServer TS 2 H PortServer TS 4 H ENHANCEMENTS Support for the new multi-port MEI boards was added. This provides MEI interfaces on all four serial ports, as well as the ability to provide power over the RI and DTR modem signals and use power provided on the RI signal of the first port. The H series of products allow extended temperature operation. KNOWN LIMITATIONS - Latency optimization mode is not suited for high bandwidth applications. ADDITIONAL INFORMATION A TFTP server will be required for the following steps: Command Line Upgrade of EOS -------------------------- Upgrade the EOS with the command: boot load=:82000747_J1.bin The unit should be reset after the EOS upgrade. HTTP upgrade of EOS -------------------- The EOS may also be upgraded from the Web UI configuration interface. From the machine containing the image file to which you will be upgrading, navigate the WebUI menus to "Admin\HTTP Upgrade" and enter the path and filename into the text box on the screen and click submit. ------------------------------ HISTORY 93000444G: 2003-05-20 82000747_J1 - patch for RTS toggle functionality - Fix for possible race condition when lowering RTS - Add recovery process for instances where RTS may be left high 2003-03-14 82000747_J - extended temperature product support - Support for extended temperature devices - Digi One TS H - PortServer TS 2 H - PortServer TS 4 H 93000444E: 2003-03-11 82000747_H - multi-port MEI feature enhancements - Support for multi-port MEI devices - Multiple MEI interfaces - Serial power 2002-12-06 820000747_G - December 2002 feature enhancements - Enable Port Buffering - Modem Emulation support - Changing of the root prompt - Double echo from a Windows telnet client - Web interface doesn't allow input for USID # - Web UI to upgrade BOOT/POST images - store IP by name - ability to configure socket ID's above 50000 - Added support for the device to be its own gateway - ICMP Destination Unreachable error crashes - SSH causes to reboot even before a passwd propmt is given - Fix Network performance issue - First character stripped - RealPort clear RTS value - Clearing the termtyp field via Web causes unit to reboot - Need the ability to make crts and or toggling of dtr/rts sticky - RealPort disconnect reboots the unit 93000444C: 2002-08-16 82000747_F - August 2002 feature enhancements - Improved latency in new latency optimization mode - UDP to serial port connectivity - Secure access feature to disable insecure connection methods - RTS Toggle - RFC 2217, Telnet extension for serial port control - Configurable ethernet duplex and speed settings - Serial mark and space parity - cpconf support in web interface 93000444A: 2002-04-23 82000747_A - First Release of firmware. This is the initial release of firmware for the Digi One device server family. These devices provide high-performance serial port connectivity with added MEI support on first serial port, 802.3af powered Ethernet, and 9-30V DC power. These devices support a 10/100 mbps Ethernet network interface, TCP/IP, Telnet, Reverse Telnet, SNMP, PPP, SSHv2, PortBuffering, Ping-ARP, ADDP, DPA-Remote monitoring tool, and Digi's patented RealPort software for COM or TTY port control and management.