How to fix your Pscript.dat file


You don't need a new driver. You need to find the file Pscript.dat that is
included on your driver diskettes. Use a Dos editor to edit the file.  The line that 
needs to be changed is   @SupportedOS=3.12^4.10^4.11 .  All you need to do is
add ^5.00 or ^5.10 to the line. This will make the driver install in NetWare5. Attached is an
example of what the Pscript.dat file should look like. This is only an example you 
should not replace your existing Pscript.dat file with the one below.   



#########################################################################
#                                                                       #
# PRODUCT INSTALLATION SCRIPT FOR: Digi International NetWare NCM Driver#
#                                                                       #
#########################################################################
#[Version 1.02]
@PRODUCT=DGNCM, V1.02, Digi NetWare NCM Driver,DGNCMCFG, DGNCMUIN
@ReqSpace=1200000
@SupportedOS=3.12^4.10^4.11^5.00^5.10

#####################################
#                                   #
#   Digi Netware NCM Driver Disk    #

#                                   #
#####################################




10/07/98