Release Notes 93000335_D
			      for
		       Digi AccelePort RAS
		   Novell NetWare Driver Package
			     v1.0.4
		     Release Date: 3/22/1999

Please reference the following number(s) when searching the Digi FTP/WWW
site for the latest software packages:
  Software Image P/N 40001908_D - NetWare RAS Driver Package

These numbers are for informational purposes only:
  CD-ROM Software Image P/N 40001905 - NetWare RAS Driver Package

Enhancements

    Support for the Acceleport RAS product line has been added.

    Added the ability to set Address Type and Numbering Plan
    information using dgrascfg.nlm for PRI and BRI ISDN 
    configurations.

Bug Fixes

    Switch support has been improved.

    Assorted modem improvements.

    Assorted ASYNC driver bug fixes.

    Fixed ISDN bug related to incorrect Address Type and 
    Numbering Plan default settings.
    

Known limitations

    This release has known fax issues.  This release is intended for 
	NW Connect and NIAS use.

    Caller ID data is currently ignored.

    Channelized T1 Wink Digits are curretnly ignored.

    On Channelized T1 Wink Start Trunks without dial tone 
    supervision, modems must be initialized with ATX3 for
    dial out.

    On Channelized T1 Trunks all calls are routed to the
    serial driver.

    On ISDN Trunks, voice calls are routed to the serial 
    driver, digital calls are routed to the ISDN driver.

    Currently, modems are not automatically assigned to 
    open serial ports when calls are received. They are 
    assigned based on the timeslot of the call. Therefore,
    unless all the serial ports to the board are open, it is
    possible a call will not be answered.

    Large MLPPP bundles greater than 23 will fail.

    ISDN numbers must not contain any non-numeric characters
    (e. g. "-").

    On ISDN Trunks, the following rules are applied to modem
    dial strings:
     a) A comma (delay) in the first or second position is
	allowed,
     b) then the first non-numeric character terminates the
	dial string

     (e.g. 9,12345678 is a valid dial string and 9,1,234-5678
      is not)

Manual Errata

    All boards should be reconfigured by deleteing the 
    SYS:SYSTEM\DIGIINTL\*.cfg configuration files and using the 
    DGRASCFG.NLM utility.

    If DGMNGR.NLM reports an error during initialization one should delete
    the *.cfg files (EXCEPT FOR DFCAPRAS.CFG) from the SYS:SYSTEM\DIGIINTL 
    directory and reconfigure the digital lines.

    For modem initialization string use the Novell provided
	"Rockwell compatible 56k (56 Flex)" string.

    ISDN modem use ISDN(AT control) under standard Novell
    initialization strings.
	

    The following software modules have some command line options
    that could prove useful. 

    DGPAV.NLM  (User must manually load)
    Digi Portassist Viewer - Views ISDN D Channel traces. 
    Help: Load DGPAV -?
    Usage Example: Load DGPAV -B0 -L1 -C

    DGDXB.NLM (Loaded at system boot)
    Shows card statistics
    Help: dgdxb -?
    Usage Example: dgdxb status
		
    DFCAPRAS.NLM (ISDN Driver, loaded at system boot)
    With ISDN configured, shows ISDN statistics
    Help: DFCAPRAS -?
    Usage Example: DFCAPRAS linestatus brd=0