/*****************************************************************************
 *
 * @(#)Digi International Inc. rel_note	1.2 3/20/00
 *
 *****************************************************************************
 *
 * Copyright (c) 1988-00 Digi International Inc., All Rights Reserved
 * 
 * This  software  contains  proprietary  and  confidential   information   of
 * Digi International  Inc.   By  accepting  transfer  of this copy, Recipient
 * agrees to retain this software in  confidence,  to  prevent  disclosure  to
 * others,  and  to make no  use of this software other than that for which it
 * was delivered.  This is an unpublished copyright work  Digi   International
 * Inc.    Except   as   permitted   by  federal  law,  17 USC 117, copying is
 * strictly prohibited.
 * 
 * Digi  International  Inc.  CONFIDENTIAL  -   (Digi    International    Inc.
 * Confidential  when   combined   with   the   aggregated  modules  for  this
 * product) OBJECT CODE ONLY SOURCE MATERIALS
 * 
 * (C) COPYRIGHT Digi International Inc. 2000
 * 
 * All Rights Reserved
 * 
 * US   Government   Users   Restricted   Rights   -   Use,   duplication   or
 * disclosure  restricted by GSA ADP Schedule Contract with Digi International
 * Inc.
 * 
 *****************************************************************************/
                         Release Notes 93000148_M

                                  for
                Digi Xr, C/X, EPC/X, and Xem Async Driver.
                        Solaris x86 V2.x and later

               Software Package P/N    75000148_M
               Software P/N            80006640_M
               Diskette P/N (3.5")     40000957_M        version 1.7.0.
               Software Manual P/N     92000193_D
                                03/20/00

 Introduction.
   The Digi device driver software has been written to take advantage of 
   the functionality of FEP 5.x with the facilities provided by Solaris 
   x86.  This includes the following:

   Support for up to seven Digi Acceleport Xr, C/X, EPC/X and Xem 
   serial communications adapters under PCI, EISA, and ISA configurations. 

   Cooked mode processing by the FEP/OS on the adapter.

   Support of standard data rates through 115K baud on hardware that supports
   it, and support through 921K baud on the Acceleport Xr 920.

   Support for RTS, CTS, DTR and DCD hardware flow control through stty and
   ditty, and also DSR hardware flow control through ditty.

   Support through ditty (altpin) for alternate pinouts on RJ-45 type 
   modular connectors. DCD and DSR are swapped so DCD can be accessed 
   with an eight-wire cable.

 Enhancements.
   -Updated FEPOS in driver to correct C/X C/CONN problem where conc flips
    on OFC/IFC when "tip"ed.

 Known Limitations.
   - PCI support is limited to Solaris version 2.5.1. and later.

 Manual Errata.
   -Before the first use, you may have to setup the PortServer as:

   -The manual may not mention some newer installation options.  If the 
    users have no preference, they should answer yes to installation questions.