Release Notes P/N 93000561_A

                    Digi RealPort Driver Package
                           Version 1.0.1
                                 for
                      SCO OpenServer 6 (Legend)

                    Software Package P/N 40002485_A

                           August 1st, 2005



CONTENTS
Section         Description
1               Introduction
2               Supported Products
3               Enhancements
4               Bug Fixes
5               Known Limitations
6               History
7               Notes



Introduction

   The Digi RealPort driver is a set of TCP network drivers that provides
   real tty functionality for Digi's Ethernet-based Serial Products.

   This software package has been tested under SCO OpenServer 6,
   and SCO OpenServer 6 with Maintenance Pack 1.  

   This package also contains:

      1) ncxa_config:	Allows root the ability to add or remove RealPort
                        products in the driver.
      2) ditty:         Digi's stty replacement.
      3) dinc:          A cu replacement.  Simpler to use than cu.
      4) dgipserv:      Stores and saves an IP on selected Digi products.
      5) dgelreset:     Allows root the ability to reboot a local or remote
                        EtherLite.

   This RealPort package includes software developed by the OpenSSL Project
   for use in the OpenSSL Toolkit (http://www.openssl.org/).


Supported Products

     Digi Connect Family
     Digi EtherLite Family
     Digi Flex Family
     Digi One Family        
     Digi CM Family
     Digi PortServer Family
     Digi PortServer II Family
     Digi PortServer TS Family
     Digi PortServer TS MEI Family
     Digi PortServer TS W MEI Family
     Digi PortServer TS M MEI Family
     Digi PortServer TS H MEI Family
     Digi PortServer TS P MEI Family


Enhancements

    Initial release.


Bug Fixes

    Initial release.


Known Limitations

    During package removal on OpenServer 6 Maintenance Pack 1,
    you may receive a warning similar to the following:
        UX:pkgremove: WARNING: e-mail notification may have failed
    The warning message is harmless and can be ignored.

    The default TCP port for RealPort units is 771.  This port is officially
    reserved for rtip.  If you are using rtip you will need to configure
    your units and RealPort driver to use a different TCP port.

    Driver support for RealPort with encryption is only supported for Digi
    products that also include support for RealPort with encryption.
    Not all Digi products support encryption.  Please check your
    Digi product's firmware documentation for more information.


History


    Version 1.0.1

    Enhancements

        Initial release.

    Bug Fixes

        Initial release.


Notes


    None.