Release Notes PN 93000451 Digi AccelePort Xp Adapter Driver Version 5.0.313.0, 05/23/2003 Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows Server 2003 Software Package PN 40002248 CONTENTS Section Description ------------------------------- 1 Introduction 2 Supported Operating Systems 3 Supported Products 4 Known Limitations 5 Update Driver 6 Additional Notes 6.1 Digi PortAssist Manager 7 History 1. INTRODUCTION This document describes the device driver that supports the Digi devices listed below. The driver is for use with Microsoft Windows 2000, Microsoft Windows XP, or Microsoft Windows Server 2003. Refer to the following number when searching the Digi International Inc. Web site (www.digi.com) or the FTP site (ftp.digi.com) for the latest software package: 40002248_ 2. SUPPORTED OPERATING SYSTEMS Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows Server 2003 3. SUPPORTED PRODUCTS Digi AccelePort 2p Adapter Digi AccelePort 4p Adapter Digi AccelePort 8p Adapter Digi AccelePort 16p Adapter 4. KNOWN LIMITATIONS To use the adapter with serial printers, reboot the system after device installation or after renaming ports. This is a known limitation of the Print Spooler which does not detect changes in the list of available ports automatically. 5. UPDATE DRIVER You need administrative privileges to update device drivers. Please be sure you are logged into Windows as Administrator or as a user that is a member of the Administrators group. To update an existing AccelePort RAS driver, first perform these steps: 1. Unzip the driver installation package to a folder of your choice. 2. Run Dgaxcln.cmd to remove previous Inf file versions. Next, locate and follow the instructions for your specific operating system: WINDOWS 2000 a. First, navigate to the Device Manager and locate the device whose device driver is to be updated: o From the Desktop, right-click on "My Computer" o Select "Manage" o In the left-hand side of the Computer Management window, select "Device Manager" Locate the adapter to update: o In the right-hand side of the window, expand the device category entitled: "Multi-port serial adapters" o Right-click on the device to update o Choose "Properties" Begin the update process: o Click the "Driver" tab o Click the "Update Driver..." button o Click "Next >" o Verify that the default option is selected, "Search for a suitable driver for my device (recommended)" o Click "Next >" o Deselect all options o Select the option, "Specify a location" o Click "Next >" o Enter the path to the new driver files and click "OK" o Click "Next >" b. Windows will display a "Digital Signature Not Found" message, explaining that the driver is not signed. Click "Yes" to continue the installation. You may see several of these warnings -- simply click "Yes" for each message to proceed with the upgrade. c. Windows will now install the new device driver for the adapter and its modems. d. Follow any other instructions to complete the installation. e. Click "Finish" to dismiss the Upgrade Device Driver Wizard. f. Repeat steps a. through e. for each device you want to update. WINDOWS XP WINDOWS SERVER 2003 The Windows XP and Windows Server 2003 update process is very similar to the Windows 2000 update process. a. First, navigate to the Device Manager and locate the device whose device driver is to be updated: o Open the Start menu o Right-click "My Computer" o Select "Manage" o In the left-hand side of the Computer Management window, select "Device Manager" Locate the adapter to update: o In the right-hand side of the window, expand the device category entitled: "Multi-port serial adapters" o Right-click on the device to update o Choose "Properties" Begin the update process: o Click the "Driver" tab o Click the "Update Driver..." button o Click "Next >" o Verify that the default option is selected, "Search for a suitable driver for my device (recommended)" o Click "Next >" o Deselect all options o Select the option, "Specify a location" o Click "Next >" o Enter the path to the new driver files and click "OK" o Click "Next >" b. Windows will display a dialog indicating that the software has not passed Windows Logo testing. Choose "Continue Anyway" to proceed with the upgrade. You may see several of these warnings -- click "Continue Anyway" for each message to continue the installation. c. Windows will now install the new device driver for the adapter and its modems. d. Follow any other instructions to complete the installation. e. Click "Finish" to dismiss the Upgrade Device Driver Wizard. f. Repeat steps a. through e. for each device you want to update. 6. ADDITIONAL NOTES On-line help is available when you install the product. Installation documentation can be found at Digi's Web site, http://www.digi.com, or at Digi's FTP server, ftp://ftp.digi.com. 6.1 Digi PortAssist Manager --------------------------- This driver's PAM communication agent uses UDP Port 2364. PortAssist Manager users will need to reconfigure the PAM Server to use this port number instead of the default. See the Users Guide at http://www.portassist.com for further instructions. 7. HISTORY Version 5.0.313.0 (M Release) ----------------------------- o Fixed IOCTL_SERIAL_IMMEDIATE_CHAR (TransmitCommChar), which was not waiting for previous request to complete. o Fixed modem signals so that DTR and RTS default to high on first open. o Fixed throughput problems introduced in the M1P release. o Fixed extremely slow throughput when the "Write Complete When Sent" option is enabled. o Updated AccelePort Xp firmware to C release. Detailed information about firmware enhancements and bugfixes can be found in the AccelePort Xp firmware Release Notes. o Implemented RTS toggle support. o Added support for Microsoft Windows Server 2003. Version 5.0.307.0 (M1P) ----------------------- o Removed support for AccelePort RAS, DataFire RAS and DataFire SYNC adapters. o Enhanced co-installer to support the "Update Driver..." functionality available through the Device Manager. o Assigned new part number and released driver as new product. o Fixed write timeout failure, in which timed-out writes were being inadvertently completed with STATUS_CANCELLED. o Fixed write timeout failure caused by enabling the "Write Complete When Sent" option. Version 4.0.229.0 (L Release) ----------------------------- o Fixed: DataFire Sync configuration dialog for X.25 does not show up. o Fixed: WanLinks driver does not remove keys from SERIALCOMM when uninstalled. o Fixed: The DigiAsyn.sys driver is hanging in an endless loop. o Fixed: Multiple issues with E1/R2 parameter configuration. o Fixed: The DigiAsyn.sys driver does not handle zero length read requests correctly. o Fixed: Some timed-out writes are being inadvertently completed with STATUS_CANCELLED. o Fixed: Write timeout does not work when Write Complete When Sent option is enabled. o Fixed: Dgclean.cmd does not delete DIGIMPS.inf and MDMDGDEN.inf files. o Fixed: DataFire Sync driver may crash during driver update or uninstall. o Updated DataFire RAS firmware to M release. Detailed information about firmware enhancements and bugfixes can be found in the DataFire RAS firmware Release Notes. o Fixed: DataFire Sync bugchecks under HIS 2000 SNA configuration (digisoh.sys). o Fixed: AccelePort Xp bugchecks when returning from Standby (random). o Fixed: Microsoft FAX does not work with AccelePort Xp. o Fixed: Unable to print with AccelePort Xp. o Fixed: Parity error detection failure with AccelePort Xp. Version 4.0.217.0 (L3P) ----------------------- o Fixed: Caller DID option not working. o Fixed: E1/R2 GroupB and backward signalling range incorrect. o Fixed: Add Channel Mapping option for DataFire RAS24/48/30/60 CT1 and PRI. o Fixed: Driver does not start when installing L2P from scratch. o Fixed: DgUpdate.exe fails with error unable to find specified file. o Fixed: DeviceIoctls test application causes bugcheck. Version 4.0.214.0 (L2P) ----------------------- o Fixed problem establishing fax connection. o Changed Sync2000 PLX9080 setup to initialize in PCI 2.1 mode. o Fixed problem with modem country setting for E1/T1 cards. o Fixed: Port Assist Viewer does not show ISDN layer 3 status. o Fixed: Port Assist Viewer faults when clearing statistics. o Fixed: Port Assist Viewer does not display RAS30/60 boards in E1R2 mode. o Fixed dgupdate issues. o Fixed Sync2000 issues in preparation for WHQL submission. o Corrected Inf issues in preparation for WHQL submission. o Fixed 15 second delay on ring-back for dense modems. o Fixed: DM_BB diagnostic not working on Win2K. o Fixed: RasAudio diagnostic not working on Win2K. o Fixed: Debug information displayed in free build. o Fixed serial printing errors. Version 4.0.210.0 (L1P) ----------------------- o This version was not released to the public.