Release Notes PN 93000379 Digi AccelePort Xp, RAS and Sync Drivers Version 4.0.229.0 Microsoft Windows 2000 Microsoft Windows XP Home/Professional Software Package PN 40002089_L 05/21/2002 INTRODUCTION This driver supports all Digi adapters listed below. These adapters provide connectivity in a Windows 2000 environment and support a broad range of WAN connections, including serial, V.90 modems, ISDN (BRI and PRI), Frame Relay, SNA (SDLC, X.25/QLLC), PPP and X.25 protocols. Digi International announced the discontinuation of the DataFire RAS product line in September 2001. In our continued effort to support DataFire RAS customers, we entered into a definitive agreement to sell the DataFire RAS product line to Patton Electronics Company in November 2001. All business areas related to the DataFire RAS product line are now handled by Patton Electronics. If you have any technical questions with respect to the DataFire RAS product line, please contact Patton Electronics via e-mail at support@patton.com, or call 1-301-975-1000 and ask for the technical support team. Additional information is also available on the Patton Electronics website at , including driver updates and future releases. Please note that the AccelePort RAS product line is NOT part of the DataFire RAS product line acquisition by Patton Electronics. Digi International will continue to sell and fully support all AccelePort RAS products without restrictions. SUPPORTED PRODUCTS AccelePort Xp Family of Adapters: AccelePort 2p AccelePort 4p AccelePort 8p AccelePort 16p DataFire RAS PTE Family of Adapters: DataFire RAS 24 PT1 DataFire RAS 48 PT2 DataFire RAS 30 PE1 DataFire RAS 60 PE2 DataFire RAS B4STU Family of Adapters: DataFire RAS B4U DataFire RAS B4ST DataFire DSP CompactPCI Family of Adapters: DataFire DSP 24 PT1 CompactPCI DataFire DSP 48 PT2 CompactPCI DataFire DSP 30 PE1 CompactPCI DataFire DSP 60 PE2 CompactPCI AccelePort RAS Family of Adapters: AccelePort RAS 4 AccelePort RAS 8 DataFire PRIme Family of Adapters: DataFire PRIme PCI T1 DataFire PRIme PCI E1 DataFire Sync Family of Adapters: DataFire Sync 2000 2P PCI DataFire Sync 2000 2P+ PCI DataFire Sync 2000 4P PCI DataFire Sync 2000 4P+ PCI DataFire Sync 2000 2P CompactPCI DataFire Sync 2000 2P+ CompactPCI DataFire Sync 2000 4P CompactPCI DataFire Sync 2000 4P+ CompactPCI DataFire Sync 2000 2P PMC DataFire Sync 2000 2P+ PMC DataFire Sync 2000 4P PMC DataFire Sync 2000 4P+ PMC DataFire Sync/570 2P PCI DataFire Sync/570 4P PCI KNOWN LIMITATIONS Installation/User Interface: You must follow the procedure outlined in the "DRIVER INSTALLATION NOTES FOR WINDOWS 2000" section of this document to properly install the driver set. Within the wizard mode, if invalid input has been entered and back button is pressed, an error message may appear indicating that the input is invalid. A valid input needs to be entered to be able to go back. PortAssist Viewer: PortAssist Viewer is the diagnostics application used to troubleshoot problems on your WAN connections. There is no Start menu link to run PortAssist Viewer. To run PortAssist Viewer, choose Start|Run and enter Digiview. If you reconfigure or install adapters while PortAssist Viewer is running, you are prompted to reboot for those changes to take effect. PortAssist Manager: PortAssist Manager is the web based monitoring tool for Acceleport Xp, Acceleport RAS, and DataFire RAS adapters. If you reconfigure or install adapters while PortAssist Manager is running, you are prompted to reboot for those changes to take effect. RAS Adapters: On Channelized T1 Wink Start Trunks without dial tone supervision, modems must be initialized with ATX3 for dial out. When configuring dial up modem service for a line, all modems on the line should be configured since incoming calls may be assigned to any channel. On ISDN Trunks, the following rules are applied to modem dial strings: 1. A comma (delay) in the first or second position is allowed. 2. Then the first non-numeric character terminates the dial string (e.g. 9,12345678 is a valid dial string and 9,1,234-5678 is not). SYNC Adapters: When using the SDLC interface, the maximum BTU (Basic Transmission Unit) is limited to 521 bytes. This is a known limitation of the IBM SDLC link service provided in SNA Server. See the Microsoft SNA article, "Maximum BTU Limit for Dumb SDLC Interface" for more information. Sync/570 Adapters: When installing additional Sync/570 adapters, a system reboot is required to complete the installation. The new adapters will not function until the system is rebooted. DRIVER INSTALLATION NOTES FOR WINDOWS 2000 Note: Update Driver functionality is not currently supported. If you have already installed drivers for your adapter, you must uninstall them first. Otherwise, skip to step 2. 1. Uninstall previously installed drivers. From the "Device Manager" right-click on the Digi adapter(s) you would like to uninstall from the system and select "Uninstall". 2. Run the program DgClean.cmd to remove existing INF files for your adapter. This will ensure the new drivers will be installed correctly. Dgclean.cmd is located in the folder with your downloaded drivers. 3. Shutdown your computer and install the adapter according to the "Hardware Installation Instructions" included with the adapter. 4. Start your computer and login. When the "Found New Hardware Wizard" appears, follow instructions to "Search for a suitable driver for my device". Specify the folder in which you downloaded the driver. 5. Windows will display a "Digital Signature Not Found" message, explaining that the drivers are not signed. Click "Yes" to continue the installation. You will see several of these warnings, click "Yes" to continue through all of them. 6. Follow instructions to complete the installation. 7. The "Found New Harware Wizard" may appear several times more depending on the number and type of adapters you are installing. HISTORY Version 4.0.229.0 (L Release) BUG FIXES Fixed: DataFire Sync configuration dialog for X.25 does not show up (#8068) Fixed: DataFire Sync bugchecks under HIS 2000 SNA configuration (digisoh.sys) (#7820) Fixed: WanLinks driver doesn't remove keys from SERIALCOMM when uninstalled (#8412) Fixed: The DigiAsyn.sys driver is hanging in an endless loop (#7656) Fixed: AccelePort Xp bugchecks when returning from Standby (random) (#7649) Fixed: Parity error detection failure with AccelePort Xp (#7542) Fixed: Microsoft FAX does not work with AccelePort Xp (#5702) Fixed: Unable to print with AccelePort Xp (#5081) Fixed: Multiple issues with E1/R2 parameter configuration (#7956, #7897) Fixed: The DigiAsyn.sys driver doesn't handle zero length read requests correctly Fixed: Some timed-out writes are being inadvertently completed with STATUS_CANCELLED Fixed: Write timeout does not work when Write Complete When Sent option is enabled Fixed: Dgclean.cmd does not delete DIGIMPS.inf and MDMDGDEN.inf files Fixed: DataFire Sync driver may crash during driver update or uninstall Updated DataFire RAS firmware to M release. Detailed information about firmware enhancements and bugfixes can be found in the DataFire RAS firmware Release Notes. Version 4.0.217.0 (L3P) BUG FIXES Fixed: Caller DID option within Windows 2000 server is not working (#5576) Fixed: E1/R2 GroupB and backward signalling range incorrect (#5653) Fixed: DgUpdate.exe fails with error unable to find specified file (#7203) Fixed: Add Channel Mapping option for DataFire RAS24/48/30/60 CT1 and PRI (#7380) Fixed: Driver does not start when installing L2P from scratch (#7582) Fixed: DeviceIoctls test application causes bugcheck with AccelePort Xp (#7656) Version 4.0.214.0 (L2P) BUG FIXES Fixed problem establishing a fax connection (#7220,#5702) Fixed dgupdate issues (#7203) Fixed multiple Sync2000 issues in preparation for WHQL submission (#6308,#6307,#6306,#6113,#5802,#5783,#5782) Corrected inf issues in preparation for WHQL submission (#6907) Fixed serial printing errors (#5221,#5081) Fixed 15 second delay on ring back for dense modems (#5099) Changed Sync2000 PLX9080 setup to initialize in PCI 2.1 mode. Problem with modem country setting for E1/T1 cards (#5764) DM_BB diagnostic not working on Win2K (#4577) RasAudio diagnostic not working on Win2K (#5303) Port Assist Viewer doesn't display RAS30/60 boards in E1R2 mode (#5071) Port Assist Viewer doesn't show ISDN layer 3 status (#3976) Port Assist Viewer faults when clearing statistics (#2495) Debug information displayed in free build (#5617) Version 4.0.210.0 (L1P) This version was not released to the public.