                Release Notes  PN 93000398 Rev A

                Digi AccelePort Xp Device Driver
                          Version 1.0.2

                     Microsoft Windows 95/98/Me      

                    Software Package PN 40002199
 
                             08/01/01


  CONTENTS

  Section      Description
  -------------------------------
  1            Introduction
  2            Supported Products
  3            Known Limitations
  4            Additional Notes
  5            History

  1. INTRODUCTION
    
     This document describes the Digi AccelePort Xp 
     Device Driver for Microsoft Windows 95, 98, and Me.

     Refer to the following number when searching the Digi
     International Inc. web site (www.digi.com) or the ftp 
     site (ftp.digi.com) for the latest software package:

     40002199_<highest revision letter>

  2. SUPPORTED PRODUCTS

     Model                  Number of Ports
     --------------------------------------
     Digi AccelePort Xp            2
     Digi AccelePort Xp            4
     Digi AccelePort Xp            8
     Digi AccelePort Xp           16

  3. KNOWN LIMITATIONS

     There is a known conflict with the Diamond Viper video 
     driver when installed on some Micron Millennia desktop
     computers. To avoid conflicts on such systems, install
     the device driver for the standard VGA display adapter.

  4. ADDITIONAL NOTES

     On-line help is available when you install the product.

     Installation documentation can be found at Digi's Web site, 
     http://www.digi.com, or at Digi's FTP server, ftp://ftp.digi.com.

  5. HISTORY
    
     Version 1.0.2
     -------------

     August 01, 2001 -- First customer ship

     o Added a read notification check to PortSetReadCallback
     o Added open, close and transmit timeouts to avoid locking 
       the system when affected by a hardware conflict with the 
       Viper driver
     o Implemented the low latency feature
     o Changed the low latency feature user interface from a 
       checkbox to a drop-down menu and moved to global options
     o Implemented a selective transmission pause to prevent 
       the print driver from corrupting the data stream
     o Modified the configuration handler to assign interrupt 
       request (IRQ) resources to the board's ports to coerce
       Serenum to poll for Plug and Play modems on boot
     o Implemented a sync delay when asked to drop DTR to 
       prevent the print driver from truncating the data stream
     o Implemented a workaround to the shutdown stall failure
       by modifying the polling thread to check the system 
       initialization state during each poll iteration

     Version 1.0.1
     -------------
     
     July 02, 2001 -- Initial beta release
