Release Notes P/N 93000460_A1 Digi Device and Terminal Server Setup for Windows Version 1.0.2.0 for Windows 98, NT, 2000, XP, ME. Software Package P/N 40002256_A1 September 17, 2002 CONTENTS Section Description ----------------------------------- 1 Introduction 2 Supported Products 3 Enhancements 4 Bug Fixes 5 Known Limitations 6 History 7 Notes Introduction This application allows users to find, set the IP address, and launch the web configuration utility for Digi One DS/TS products. Supported Products Digi One SP, Digi One IA, Digi One EM. Enhancements Added support for Digi One EM. Bug Fixes Initial Release. Known Limitations The application uses multicast to communicate with devices. Anything that interferes with multicast will make the application inoperable. Examples of known conflicts: - Having a firewall between (or on) your PC and the target device - Having a router or other network hardware between your PC and the target device when the network hardware does not support multicast. - Running over a VPN or dial up connection that does not support multicast. It is possible to set the IP address and Subnet Mask of a target device to an address that will not be reachable by your PC. The device will seem to disappear in the Digi Device and Terminal Server Setup program. Generally, the device must be reset to recover. Care must be taken in choosing a valid IP address at configuration time. If you are attempting to reconfigure a device that was previously on a different network the device may not be reachable by your PC and will not be visible in the Digi Device and Terminal Server Setup program. Generally, the device must be reset to recover. History None. Notes None.