Release Notes  PN 93000715

               Digi Connect Wi-Wave (R6000) Windows XP Embedded Driver
                  Version 1.10.36, 10/8/2010

                      Microsoft Windows XP/SP2 and above
                       Software Package PN 40002813
                        Rev A Beta Release
  
1. INTRODUCTION
    
    This is a preliminary release of the Digi Connect Wi-Wave R6000 Windows
    XP Driver software.
    
2. SUPPORTED PRODUCTS
    
    Digi Connect Wi-Wave R6000

3. INSTALLATION INSTRUCTIONS:
    A. Make sure that WZC (Wireless Zero Configuration) Service is enabled. 
       It should be enabled by default. If not read instructions at:
      
            http://msdn.microsoft.com/en-us/library/ms706593%28VS.85%29.aspx
    
    B. Unzip 40002813_A.zip into an empty folder (e.g. c:\wiwave).
    
    C. Connect adapter to USB.
    
    D. "Found New Hardware Wizard" displays a dialog box asking:
    
            "Can Windows connect to Windows Update to search for software?
            
        Select "No, not this time" and click Next.
        
        Next dialog box asks:
            "What do you want the wizard to do?"
        
        Select "Install from a list or specific location (Advanced)" and click Next.
        
        Next dialog box displays:
        
            "Search for the best driver in these locations....
            
        Check "Include this location in the search:" and enter the location of the folder
        where you unzipped 40002813_A.zip.  Then click Next.
        
        Finally, you may get a message indicating that you are installing software for
        a driver which has not passed Windows Logo testing.  Click "Continue Anyway".
        
    E. The Wiwave drivers will be installed and "Found New Hardware Wizard"
       should display a message to indicate that it has finished the installation.  
       Click Finish.
       
4. HISTORY:
    1. 10/8/2010 Initialize Release.
    
5. KNOWN ISSUES:
    - Currently Wiwave can only be configured using WZC.
    - Power Management is unsupported.  Wiwave will prevent Windows from entering standby or hibernate.
    - The WZC Wireless Network View will not refresh while the Wiwave adapter is connected.